SUBEA
Ref.
8544636
2711683
Scuba Diving 5 mm dry suit SCD 900
€680.00
Tax included
Store Availability
Store Availability
Decathlon's design teams developed this dry suit for complete insulation during your dives.
BENEFITS
Easy dressing
One-piece with hood (sold separately). Back zip. Internal braces.
Thermal insulation
5 mm waterproof bodysuit Choosing your base layer based on the temperature
Freedom of movement
Pre-shaped cut on the arms and legs, arch for easier movements.
Durability
Reinforcements (Supratex) on the knees, feet, buttocks, shoulders and back.
Pockets
2 side pockets with gussets, ring and hood fastener.
Waterproof
Watertight metal back zip and Si-tech valves. Smooth neoprene sleeve cuffs.TECHNICAL INFORMATIONS
Details of thermal insulation
The suit is made from 5 mm neoprene panels (with production tolerance).
Distribution:
Thermospan on the chest and back to increase the feeling of warmth
Supratex at the knees, seat and soles of feet for superior abrasion resistance
Smooth Glideskin cuff and neck seals: the smooth part is turned over to stick to the skin and prevent water leakage.
Wear underwear for thermal insulation.
Distribution:
Thermospan on the chest and back to increase the feeling of warmth
Supratex at the knees, seat and soles of feet for superior abrasion resistance
Smooth Glideskin cuff and neck seals: the smooth part is turned over to stick to the skin and prevent water leakage.
Wear underwear for thermal insulation.
Waterproofing
Fully waterproof metal back zip.
It is recommended to regularly lubricate the zip with paraffin to prolong its life and to make the suit easier to close.
The seams of the suit and hood are waterproof, with a glued and blind stitched (GBS) assembly: the neoprene is glued first of all, then sewn for maximum strength (the sewing needle does not go completely through the neoprene in order to prevent water infiltration).
Si-tech valves
It is recommended to regularly lubricate the zip with paraffin to prolong its life and to make the suit easier to close.
The seams of the suit and hood are waterproof, with a glued and blind stitched (GBS) assembly: the neoprene is glued first of all, then sewn for maximum strength (the sewing needle does not go completely through the neoprene in order to prevent water infiltration).
Si-tech valves
Freedom of movement
One-piece (the hood is sold separately).
No underarm seams for easier arm movements and to prevent irritation. Pre-shaped cut on the arms and legs, with back arch for easier movements.
No underarm seams for easier arm movements and to prevent irritation. Pre-shaped cut on the arms and legs, with back arch for easier movements.
Resistance to rubbing
Ergonomic supratex reinforcements at the knees, buttocks, and soles of the feet,
and on the shoulders and lower back. These reinforcements reduce the effects of friction to reduce wear of the suit. The interior seams are ended with patches to make them stronger. The GBS seams use nylon thread rather than polyester for greater durability.
System to keep a dive computer in place on both arms.
and on the shoulders and lower back. These reinforcements reduce the effects of friction to reduce wear of the suit. The interior seams are ended with patches to make them stronger. The GBS seams use nylon thread rather than polyester for greater durability.
System to keep a dive computer in place on both arms.
What is a dry suit?
A watertight dry suit provides complete insulation. The construction of the dry suit is completely watertight: seams, zip and seals.
When you put on the dry suit, air is trapped inside and is compressed to create a suction effect. To compensate for this effect, you need to add air using the chest valve during descent and release air during ascent using the valve on the biceps.
When you put on the dry suit, air is trapped inside and is compressed to create a suction effect. To compensate for this effect, you need to add air using the chest valve during descent and release air during ascent using the valve on the biceps.
Tips on how to take care of your diving suit
1) Soak the outside of the dry suit in clean water after each session.
2) Clean with a bactericide solution.
3) Rinse thoroughly in clean water.
4) Dry the right way up on a wide hanger. Caution: the sun will cause the colours of the textile parts of the diving suit to fade and speeds up the ageing process of the neoprene.
Zips can be cleaned with a toothbrush and lubricated with silicone grease.
2) Clean with a bactericide solution.
3) Rinse thoroughly in clean water.
4) Dry the right way up on a wide hanger. Caution: the sun will cause the colours of the textile parts of the diving suit to fade and speeds up the ageing process of the neoprene.
Zips can be cleaned with a toothbrush and lubricated with silicone grease.
Certification
This scuba diving suit has been tested by the independent INPP institute (Marseille, France) to check it complies with the current standard (EN 14225-2:2017).
composition
composition
Foam: 100.0% Rubber; Lining: 90.0% Polyamide, 10.0% Polyester; Hook and loop tab: 100.0% Polyoxymethylene
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Dry your diving suit out of the sun and well clear of all sources of heat. Store your diving suit on a hanger to keep its shape and conserve the neoprene.
Restrictions on use
Scuba diving
TESTS AND WARRANTY
Test product
Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.
Warranty
2 Years
Agree by
Our technical partner: Planet Ocean (the PADI 5-star diving centre) based on the watersports Centre by DECATHLON in Hendaye - France. The centre uses SUBEA equipment throughout the year. The team of instructors are rigorously involved in the development of our SUBEA diving products: the design phase with the SUBEA team (product manager, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year round).