Inflatable stand-up paddle and kayak electric pump 12V / 15A Star Pump 7
Store Availability
Store Availability
BENEFITS
Compatibility
1 Boston attachment, 1 mini Boston attachment, 1 high-pressure attachment.
Ease of use
Set the pressure, start the pump and let it inflate.
Power
Inflates a 300L SUP to 15 psi in approximately 15 minutes.
Parameter measurement
Inflates to 16 psi and automatically stops at target pressure
TECHNICAL INFORMATIONS
Supplied with a set of adapters
In addition to its standard adapter to inflate your dropstitch SUP or kayak to high pressure, the pump also comes with:
A "Mini Boston" adapter to inflate the kayak seats
a "Boston" adapter to inflate low-pressure kayaks, inflatable air mattresses and tents.
Connection
Works plugged into a 12 V cigarette lighter socket.
Provides pressure of up to 16 psi (1 bar).
Can be used to inflate low-pressure kayaks (1 to 2 psi) and stand-up paddle boards (10 to 16 psi).
Operation
1/ Connect the pump to the cigarette lighter with the car engine running.
2/ Connect the pump hose to the SUP
3/ Select the psi/bar/hpa mode with the arrow button
3/ Pre-set the recommended pressure with the +/- buttons
4/ Press ON to inflate.
5/ The pump automatically stops at the set pressure.
Auto stop
Once the selected pressure is reached, the pump stops automatically. This prevents over-inflation and damage to your kayak or stand-up paddle board.
SAFETY CHECK
Make sure that the cigarette lighter plug is fully pushed in to avoid overheating caused by a poor electrical connection.
Tips for storage and maintenance
Storage tips
Store in a dry place. Avoid dust and sand.
Restrictions on use
Follow the recommended pressures on your inflatable product.
TESTS AND WARRANTY
Warranty
2 Years