Cross-country ski binding with insert, TOUR LIGHT+
Store Availability
Store Availability
BENEFITS
Compatibility
Suitable with pin binding boots.
Ease of use
Use of the heel lift without removing the skis, with the tip of your pole.
Lightweight
340 grams per binding
Adjustable
3-position rotary heel lift. Adjustable length of 50mm DIN 5-12
TECHNICAL INFORMATIONS
Using the binding when going uphill
Place your boot on your forefoot at a slight angle. Once your boot ergos (metal holes) are opposite the binding pins (metal cones), apply pressure. The binding is clipped at the front.
When climbing:
- Lift the black plastic part up to lock your binding.
- Turn the heel pad to avoid clipping in the back of the boot.
- Operate the heel lifts to find the correct height.
Using the binding when going downhill
Place your boot on your forefoot at a slight angle. Once your boot ergos (metal holes) are opposite the binding pins (metal cones), apply pressure. The binding is clipped at the front.
When descending:
- Leave the black plastic part down so that it can be triggered in the event of a fall.
- Turn the heel pad to clip the back of the boot.
- Clip in with a sharp movement of the heel
Binding release standard
Please note that many cross-country skiing bindings are not standardised.
The binding is triggered using a spring.
The standard follows the DIN scale.
In theory, an 80 kg skier will adjust their binding to the number 8 graduation. In reality, they will have to take into account their skiing level, physical fitness and snow conditions.
Adaptability
Compatible with Dynafit or Wedze crampons.
Sold with a ski leash to connect the boot to the binding.
composition
composition
Main part: 100.0% Aluminium
TESTS AND WARRANTY
Warranty
2 Years