ADDITIONAL OR REPLACEMENT BATTERY FOR THE ITIWIT ELECTRICAL ASSISTANCE SYSTEM

How do I put the battery in my electrical assistance and connect it?

Insert the battery in the correct direction with the battery connector facing down.



Connect the motor cable to the battery, then close the motor nose by aligning the mark with the padlock, then turn clockwise 1 turn until the mark is aligned with the padlock again.



To ensure proper sealing, the gasket must be clean and in good condition, and the motor nose must be screwed on properly.

What are the guidelines for use of the battery?

It is imperative that you store and charge your battery in a cool (between +10°C and +25°C) and dry place away from the sun.



Do not store the battery discharged, as deep discharge could cause it to malfunction.



Remember to recharge the battery (even when not in use) at least every 3 months to avoid deep discharge and deterioration of the battery's capacity.