Children's 14x1.50 Stiff Bead Bike Tyre / ETRTO 38-254
Store Availability
Store Availability
BENEFITS
Compatibility
For 14" inner tubes and wheels.
Puncture resistance
Good resistance with the 30 TPI carcass.
Weight
260g. Stiff bead
Traction
The knobbly tread structure provides good traction on various types of terrain.
Instructions
DownloadTECHNICAL INFORMATIONS
How to measure tire wear?
To measure the wear on your tyres and to know when they need replacing, you need to inspect the tread. The tread comes into direct contact with the ground you are cycling on and therefore determines your tyre's performance.
A tyre needs to be replaced when the centre knobs are worn down to the same height as the side knobs.
How to disassemble a tire?
To remove your tyre, deflate the inner tube until no more air comes out.
Then separate the tire from the rim with a tire lever.
How to fit a tyre
Make sure the arrow on the sidewall is pointing in the direction of travel.
To put your tyre back on, place the bead (the rigid part that determines the shape of your tyre) on the rim.
Once you have done this, inflate your inner tube by approximately 30% before fitting it to the rim (inflating it beforehand reduces the risk of pinching the inner tube).
Next, fit the second bead to the rim, starting at the opposite side to the valve.
How to inflate your tyre correctly
Inflate the tire with caution. The recommended pressure is listed on the side of your tyre. Also, before each outing, make sure that your tyres are at the correct pressure for your ride.An under-inflated tyre offers less performance when pedalling.
Pro advice:
When inflating your tyre, be sure to inflate it to the correct pressure for the terrain you will be riding on and the weather conditions.
When riding in rainy weather, lower the tyre pressure to increase the tyre's grip.
On the other hand, if you ride in dry weather, you can increase the pressure.Remember to stay within the limits displayed on the tyre wall.
composition
composition
Main part: 20.0% Steel, 20.0% Polyamide, 30.0% Latex Rubber, 30.0% Latex Styrene Butadiene Rubber
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
This is a stiff bead tyre; avoid folding it as doing so can damage it. Store it in its original shape.
Restrictions on use
Inflate to the recommended tyre pressure printed on the sidewall
TESTS AND WARRANTY
Test product
At B'Twin we design the tyres of tomorrow. Our R&D engineers design our tyres at our international headquarters in Lille, France. This expertise is highlighted on our range of B'Twin tyres with the label "Designed in France".
Warranty
2 Years
Agree by
The Wheel Energy laboratory, certified and recognised by the leading global brands, measures several different criteria: grip, cushioning, resistance to wear, longevity, performance, etc.