Men’s warm and waterproof hiking boots - SH900 PRO MOUNTAIN
Store Availability
Store Availability
BENEFITS
Traction
Snow Contact Technology: optimal grip on snow with 5 mm studs
Grip
Snow Contact technology: optimised traction on snow with laminated crampons
Warmth
Comfort temperature when static: -8°C Temperature limit when active: -17°C
Waterproof
HDRY technology waterproofing and built-in gaiter to ensure dry feet
Foot support
Mid-height upper with integrated quick lacing for fine adjustment and support
TECHNICAL INFORMATIONS
Are they warm enough for winter?
Get ready to take on the snow with our boots! With a high-coverage gaiter, tested in both laboratory and out in the field, they keep you comfortably warm down to -8°C when resting and -17°C when active. With them, your feet stay warm even in the harshest snowstorms
Our source of inspiration?
In nature, animals are the kings of adaptation! And guess what? So are we! Inspired by the hare, our boots make your feet just as agile in the snow, with pads specially designed for speed on all types of snowy terrain. Ready to bound like a hare through the snow?
Do they protect themselves from all conditions?
With its ability to retain heat and let your foot breathe, it's the perfect combination. Thanks to its HDRY waterproof membrane placed on the outside, no more wet feet! Perfect for tough adventures, it won't let you down, even in the worst situations
What is thermal comfort?
The thermal comfort of your boot keeps your feet warm while maintaining air circulation to prevent the build-up of moisture. Designed for regular, intensive use, their waterproof membrane wicks away moisture while preventing water from getting in
Are they 100% waterproof?
Our boots are designed to cope with all nature’s elements. After rigorous lab tests, they are subjected to tests on long-range technical walking trails. This model of shoes has been tested up to 100 000 flexes for waterproofing in all conditions
Traction or grip? The differences
For grip, imagine the studs of shoes like claws that grip the floor when climbing.
For grip, grooves under the soles act as a car, to keep you stable on slippery ground! With them, master the terrain of the winter as a chef!
What does the Snow Contact technology provide?
The combination of non-slip components and the specific design of the studs ensure good grip and traction on snow. The studs are positioned and precisely designed to hug the snow and remove water. However, for use on ice, add non-slip grips
Is the foot support essential?
Good shoe support is essential for your comfort and performance in the mountains. It stabilises your steps on climbs and descents, and prevents slipping and blisters, reducing fatigue and preserving energy during long outings outdoors
Are they suitable for racket?
Designed to cope with snowshoes, our boots feature a mid-height upper and anti-intrusion gaiters for guaranteed protection. The quick tightening system optimises the boot's support, guaranteeing a perfect experience during your winter outings
How durable are they?
To ensure your complete satisfaction, our engineers put our products through a whole range of laboratory tests. They include: durability of eyelets and straps, quality of bonding, toxicology safety, UV resistance, durability of the sole and upper, and accelerated ageing
How to make it easier to put them on?
To put this model on with total ease, open the zip and fold the gaiter around the boot to access the assist grip. Once released, our rapid lacing system helps your foot find its place in the blink of an eye, for an ultra-easy wearing experience
What to wear for snow hiking?
To get yourself kitted out for winter, we recommend choosing socks which are:
- Warm: Merino wool,
- Breathable: depending on the intensity of your outing to limit humidity,
- High or Mid: depending on the height of your boot’s upper
How to preserve the waterproofing?
Imagine your waterproof boots like a shield against water! Their water-repellent properties make them waterproof, breathable and lightweight. However, this ability requires a little refreshing from time to time to remain effective. Simply spray to refresh the material and keep it ready for bad weather
How to dry the inside of your boots.
To effectively dry the inside of your damp boots, remove the insole and use newspaper to absorb moisture, changing it regularly. Avoid direct heat sources which would damage the material and prioritise drying in a warm, dry, ventilated place
composition
composition
Upper of: 10.0% Elastane, 30.0% Polyamide, 20.0% Polyurethane, 40.0% Polyester; Outer sole of: 60.0% Synthetic Rubber, 30.0% Ethylene Vinyl Acetate, 10.0% Thermoplastic Polyurethane; Lining and sock of: 100.0% Polyester
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store your products in a well-ventilated room away from light and moisture.
TESTS AND WARRANTY
Test product
Our Decathlon Sportslab laboratory, based in Lille, also contributes to the innovation and development of our Quechua products. It brings together 4 themes, each with their own area and technological tools: Body shape (in particular from 3D analysis) Movement science Thermal comfort (with its four climatic chambers) Behavioural and sensory sciences In particular, we test the holding of seams, gluing, toxicology, resistance to UV and abrasion.
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our field test engineer, our product manager, as well as a panel of testers test the products throughout their development until they are marketed.
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
ProcessGreige
Product made from 4% undyed yarn
Using this finishing process enables us to reduce CO2 emissions linked to the production of undyed textiles by at least 53% compared to conventional dyeing.
-
ProcessDope dyed
Product made from 7% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
MaterialSilica-based rubber from rice husks
Product made from 6% silica-based rubber from rice husks
Using silica-based rubber from rice husks rather than conventional rubber reduces the CO2 emissions linked to the material by at least 17%.
-
Material
Rubber recycled
Product made from 1% recycled rubber
Using recycled rubber rather than conventional rubber reduces the CO2 emissions linked to the material by at least 26%.
-
MaterialRecycled polyester
Product made from 14% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.