Surfboard 6'8" - 900 mid-length white
Store Availability
Store Availability
BENEFITS
Robustness
Stratification in epoxy resin, 5 mm wooden slat.
Easy to move
Volume of 40 L and dimensions that facilitate rowing and take-off
Traction
Elongated shape with affined rails. Read in roundpin tail .
TECHNICAL INFORMATIONS
Suitability
This midlength, assembled in a 2+1 configuration, is perfect for carving in all wave types. It's well-suited to powerful point break waves up to 2 m.
It holds its own very well in hollow Landes waves.
Fitted with 2 Twin fins, it'll be more playful but with a little less drive in more hollow waves.
Fins not included
Dimensions
6'8 x 20" 3/4 x 2" 11/16
203 x 53 x 7 cm
Volume 40 L
Weight 3.7 kg without fins
Shape
Co-creation with Jeremy Smith (Hendaye).
Elongated outline.
Hull: Spooned at the front to facilitate take-off in hollow waves, ending in a double concave across three quarters of the rear of the board for improved manoeuvrability.
Bevelled rails for better entry into the water
Construction
Laminated with a 30 kg/m3 walnut EPS with epoxy resin and fibreglass.
Top: 2 x 6 oz layers 1 x 4 oz layer
Underside: 1 x 6 oz layer
Dift box reinforcement in 4 oz
Paulownia 5 mm wooden slat.
The advantages of EPS/EPOXY boards
We chose this type of construction for our surfboards, because it offers numerous advantages.
Epoxy resin is more resistant to impacts and crushing than polyester resin.
The board is more reactive and can gather more speed
The EPS foam (expanded polystyrene) floats better, meaning that, for the same volume, you have more buoyancy than with a polyester /polyurethane board.
Fins
Delivered without fins.
side 4" FCS1 ref/ (8751381) and central us box 7" ref/(8750883) available in store or on Decathlon.com.
Choosing the right fins:
For powerful waves and surfers weighing more than 70 kg, opt for the 2 +1 assembly with a 7" central and 4" sides.
For smaller waves, single or twin assembly.
Twin assembly ideal with keels.
Packaging
The board has a Flexi Hex® honeycomb case inside a sturdy box.
This case is reusable in your surfing cover to protect it while transporting.
composition
composition
Board for surf: 50.0% Polystyrene, 25.0% Glass Fiber, 10.0% Wood, 15.0% Epoxy Resin
Tips for storage and maintenance
Storage tips
Protect and carry in a cover. Avoid leaving your board exposed to extreme heat (inside vehicles in hot weather, direct sunlight)<br /> The resin is UV-sensitive
TESTS AND WARRANTY
Test product
All our boards pass a series of mechanical and extreme temperature-resistance tests.
Agree by
Our surf-loving teams and our ambassadors.
Parts guarantee
2 years excluding snapping in half and impacts.