Adult's sailing watch dungarees - Dungarees 300 mixed grey
Store Availability
Store Availability
BENEFITS
Water repellent
Water beads and runs off the fabric to keep you dry. Windproof
Resistance to salt water
Salt water-resistant zip
Windproof
Polyester (100%) main fabric and windproof membrane
Waterproof
Moderate rain. 5,000 Schmerber laminated fabric | 100% taped seams.
Pockets
1 flap pocket on the right leg. Pocket with water drainage (not waterproof)
Breathability
2-layer breathable lining, RET < 9
TECHNICAL INFORMATIONS
Features of these overalls
- an attractive price for coastal sailing
- designed for unisex wear and adaptability to different body shapes
Details below:
Comfort - Size choice
These overalls were designed from the outset to fit both male and female crew members:
- Bust height: each size is adjustable by up to 10 cm
- Hips: adjustable by up to 5 cm
- Legs: rip-tab for a secure fit on your boot.
Male or female, purchase your usual size.
Your overalls can stay on board so that they are always ready for your crew.
Waterproofing
- The waterproofing of the overalls has been tested in showers of 60 litres of water/m²/hour for 2 hours
- Fabric coated with a water-repellent treatment (water runs off the fabric)
- 100% taped seams
- Knees and buttocks lined for added resistance.
- Salt-resistant zip
One thigh pocket (not watertight)
Weight
In Size L, the overalls weigh: 730 grams
Component Breathability
To find out whether a fabric is breathable, we test its evaporate resistance or RET (ISO 11092 standard). The lower the fabric's resistance, the more moisture is evaporated, and therefore the higher the fabric's breathability.
We consider that if:
RET < 9 = very breathable fabric
9 < RET < 12 = breathable fabric.
The RET for the Sailing 300 overalls is 12.
How to wash your overalls?
To maintain the water repellent properties, infrequent washing is recommended.
Close all zips and flaps, empty all pockets and then turn the garment inside out to wash it. You can wash it on a synthetic cycle at 30°C or 40°C with your usual detergent. Do not use fabric conditioner, which could damage the existing performance of the garment, or bleach. Very important: choose a full rinse cycle or extra rinse.
Water repellency
A fabric is water-repellent when water slides off the surface of the fabric, without seeping in.
This way, your overalls do not get waterlogged, and remain lightweight and breathable. The water-repellent properties are achieved with a treatment applied to the external side of the fabric, but in practice these properties can be altered.
The water-repellent properties can be reactivated by putting the overalls in a dryer for 10 minutes at the lowest temperature.
How to reactivate the water repellency of your overalls?
Drying is a crucial phase in reactivating the water repellent treatment.
We recommend that you lay your overalls flat on a clothes rack and leave them to air-dry. Caution: never dry your overalls directly on a radiator.
Then place them in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: do not over-dry the garment.
composition
composition
Main fabric: 100.0% Polyester; Lining: 100.0% Polyester; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
TESTS AND WARRANTY
Warranty
2 Years
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
MaterialRecycled polyester
Product made from 66% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
ProcessDope dyed
Product made from 10% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.