Men's Ski and Snowboard Jacket 500 - black
Store Availability
Store Availability
BENEFITS
Adjustable
Adjustable hood.
Warmth
Insulated with synthetic loose fibres, for use in temperatures as low as -9°C.
Waterproof
15,000 mm membrane (Schmerbers) and taped seams.
Pockets
5 pockets: 2 hand, 1 ski pass, 1 inner and 1 goggle (mesh).
Breathability
Breathable fabric and ventilation strip on the back.
Limits snow entering
Automatic snow skirt and cuff fastening.
TECHNICAL INFORMATIONS
This product is repairable
We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store. However, if we can't repair your product (production defect), we will exchange it or reimburse you.
How to dry my jacket?
Dry in a tumble dryer (strongly recommended)
* Use a gentle or delicate programme.
* Dry on several long cycles to dry completely.
* If you do not have a tumble dryer, it will take longer to dry. (drying can take 1 to 2 weeks on a dry and flat place). Make sure you pat the jacket to avoid any lumps
How to wash my jacket?
* Close all the zips on the jacket
* Turn it inside out
* Machine wash at 30°, delicate programme with little detergent & without fabric softener.
Important: set to a very gently spin cycle (less than 800 rev/min): spinning too fast may create lumps that are difficult to remove
How can I prevent snow from getting in when I fall?
The snow skirt (which is automatic), as well as the adjustable cuffs, prevent the entry of snow and air during practice and especially in case of a fall.
What is the fit of the 500 jacket?
REGULAR fit. The jacket has sides that fall straight and remain parallel rather than trying to follow the shape of your body. The interior volume means this jacket can be worn in combination with a first and second technical layer.
What is a "breathable" jacket?
This garment wicks away the water vapour produced by your body when exercising. To see if a fabric is breathable, its resistance to evaporative heat (RET) is measured in a standardised ISO 11092 test. The lower the RET, the more breathable the fabric. The jacket 500 has an RET of 11. However, it is the technical solutions (zips, vents, mesh) that Wedze uses, which reduce the condensation inside the garment and maximise breathability.
How can you reactivate the water-repellency of your jacket?
Bear in mind that the water-repellent feature can be reactivated. To do this, you can use a waterproof spray (sold in our stores): spray the product evenly over the entire garment, then leave it to dry for 10 to 12 hours).
Why is water-repellency needed for my jacket?
The water-repellent property of a fabric is its capacity to allow water to run off its surface without seeping in. This jacket features water-repellent components that extend its weather resistance. The fabric is made water-repellent by treating its outer surface. However, this property may deteriorate with use.
To help you choose the right size
The model on the photo is wearing a size L and measures 185 cm.
Measurements:
Chest measurement: 104 cm
Waist measurement: 104 cm
Arm length: 45 cm
Inside leg length: 80 cm
Which parts of the jacket protect me from bad weather?
The 500 jacket has been developed with a rigorous component and assembly, which block the passage of water and limit the wind chill factor so that you can better cope with bad weather (rain, snow, wind, etc.). To validate its waterproof rating, this jacket was tested under a special shower that replicates the conditions skiers have to face. We validated the waterproofing of this product in the field in various weather conditions for several days.
What is a membrane and what's it for?
The membrane is a very fine component applied to the inner surface of the outer jacket fabric. This hydrophilic component prevents water from seeping in while wicking away the perspiration produced by the body. The membrane is unbeatable when it comes to staying warm and dry.
How is the water resistance of a jacket measured?
The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. This component has a waterproofing resistance of 10000 mm resists the pressure of 10000 mm of water.
For skiing, we advise components rated 3000 to 20,000 mm.
Plus, here at Decathlon, we lab-test all of our waterproof products. This product has a score of 3/5
How to dress to stay warm on the slopes?
To make sure you stay warm and dry, we recommend using the 3-technical-layer rule:
- Layer 1 or a second skin, to stay dry.
- Layer 2 or an insulating layer, to keep the heat in.
- Layer 3 or a protective layer to protect against the elements.
How is comfortable temperature measured?
We lab-test each of our products so that we can provide you with a indicative value on the item's comfort. This comfort indicator is measured without tights for trousers, and with a thermal t-shirt and a fleece for jackets. The measurement indicated is that of the external temperature in which the testers are neither warm, nor cold. Of course, this perceived temperature varies in line with the intensity of the activity and the metabolism of the individual.
Which components are added to the padding give it warmth?
In addition to its filling, your jacket's waterproof zips, snow skirt, collar and adjustable hood and cuffs offer better protection against the cold for a warmer feeling.
composition
composition
Padding: 100.0% Polyester; Main fabric: 100.0% Polyester; Lining: 100.0% Polyamide; Back lining: 10.0% Elastane, 90.0% Polyester; Inner fabric: 100.0% Polyester; Yoke: 100.0% Polyester; Sleeve lining: 100.0% Polyester; Collar: 100.0% Polyester; Membrane: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store on a hanger and do not fold, as this can damage the fabric's water-resistance. Dry thoroughly before storing in a dry and well-ventilated place.
TESTS AND WARRANTY
Test product
All Wedze products are conceived, designed and developed in the Mont Blanc Valley. They are then tested under identical usage conditions to those you will encounter yourself (in the snow, cold and powder snow, etc.). The design teams make sure the programme for which the product is designed and developed tallies perfectly with its real-world use.
Warranty
2 Years
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
MaterialRecycled polyester
Product made from 35% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
ProcessDope dyed
Product made from 40% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.