PACK 100 9FT M INFLATABLE STAND-UP PADDLEBOARD (BOARD, BAG, PUMP & PADDLE)- 80kg
Store Availability
Store Availability
BENEFITS
Compact design
The entire set fits into a hand-held carry bag.
Easy transport
AN ALL-IN-ONE M PACK! Inflatable board, manual pump and paddle in a bag
Weight
A complete 8.5 kg pack.
Stability
Shorter but wide for an optimal stability up to 80 kg.
User comfort
Foam deck for comfort and grip. EVA foam handle
Ease of handling
Its new shorter and wider shape allows greater manoeuvrability on the water.
Instructions
DownloadTECHNICAL INFORMATIONS
Contents of the pack
A SUP 100 (9 feet)
An orange adjustable and collapsible paddle
An easy-use manual pump
A carry bag (hand carry)
A light leash (not for surfing or river use)
A user's guide
A repair patch
Recommended user weight I Maximum load
Recommended user weight:
Less than 60 kg: ultra-stable board.
60 to 80 kg : ideal board for easily getting into stand-up paddle boarding on calm bodies of water.
Over 80 kg: if you are starting out, we recommend the X100 11ft model or the 100 COMPACT SUP 10FT
Maximum load to stay up out of the water: 220 kg.
Inflating and deflating the stand-up paddle board with the ITIWIT pump
INFLATION:
The SUP is equipped with a new-generation valve to guarantee even more security.
To inflate your SUP, open the cap and connect the pump (“IN” mode).
Inflate to 15 psi for best results.
Disconnect the pump and close the outer cap.
DEFLATING:
Turn the cap a quarter clockwise (“OUT” mode).
Roll, starting from the opposite side to the valve to remove all the air for tight folding.
Close the cap.
Fins and fin bases
2 118 mm fins for paddling in shallow water.
Available from our after-sales service and online if lost or broken (8502106)
Remember to remove the fins once you get off the water.
For your safety, protect your hand if you need to apply force to the rear of the fin to remove it in the event of blockage with sand.
If possible, rinse the bases of the fins before and after using the stand-up paddle board for easier fin installation and removal
Don't forget to put in the pin
Storing your product
Remove the fins and the leash.
Deflate the board on a dry and clean space.
Roll the paddle from front to back to release air more easily.
Close the valve.
Use the tensioning strap
Recommendations for use
We recommend:
Using a buoyancy aid jacket (reference 8501295) or a buoyancy aid belt (reference 8600104)
Not suitable for paddling further than 300 m from shelter.
Don’t use the leash on the river.
Notify someone of your trip and your whereabouts.
Research to find out if there are any local navigation rules that apply to the location of your trip.
Eco-design
A 13% reduction of the CO2 impact of the whole pack (board, paddle, pump)
We have developed a lighter drop stitch fitting to the shape of the board to offer the same performance with less material.
In addition, the bag has been dope-dyed.
This process allows the thread to be dyed at the moment it is produced, rather than submerging the fabric in large dying baths. This reduces water consumption and reduces discharges of waste water and CO2.
Technical dimensions
INFLATED SUP:
Length: 9' (274.5 cm)
Width: 33" (84 cm)
Thickness: 5" (12.5 cm)
Volume: 232 litres
Weight of the board alone: 7 kg (±10%)
When folded:
Height: 95 cm
Width: 40 cm
Thickness: 22 cm
Repair
We have a stand-up paddle board repair kit under the reference 8512384 for repairing small, easily visible leaks.
For all other repairs, we recommend that you contact the workshop of your local shore.
We can repair bases of the fins, handles, valves and significant leaks
Leash
Very lightweight leash that you won't even know is there during use and is easy to store.
Always wear your leash to stay attached to your board if you fall.
To avoid damaging the leash and leaving marks on your folded board, remove and rinse after each use.
This leash attaches to the ankle.
PLEASE NOTE: don’t use the leash on the river.
composition
composition
Board (for surf): 70.0% Polyvinyl Chloride, 30.0% Polyester; Shaft: 100.0% Aluminium; Carry bag: 100.0% Polyester; Main part: 100.0% Polypropylene; Blade (for diving): 70.0% Polypropylene, 30.0% Glass Fiber; Floor mat: 25.0% Ethylene Vinyl Acetate, 75.0% Polyethylene
Tips for storage and maintenance
Storage tips
Store deflated, flat and out of sunlight, after first removing the fin and leash. If storing inflated, release some of the pressure and store in a flat position without any load.
Restrictions on use
Not suitable for paddling further than 300 m from shelter.
TESTS AND WARRANTY
Parts guarantee
2-YEAR guarantee. Availability of spare parts essential to the use of the product: 10 years