Men’s Snowboard Bindings - All Mountain/Freestyle - SNB 500 - Black
Store Availability
Store Availability
BENEFITS
Anatomic design
S-M: shoe sizes 3 to 8 L-XL: shoe sizes UK 9 to 12
Compatibility
With boards with normal or 3D inserts (not compatible Chanel Burton)
Capacity
Pair of bindings + 2 discs + 8 x 16 mm screws compatible with discs + 8 washers
Fast acting
Classic attachment with traditional tightening buckles. Guaranteed efficiency.
Adjustable
Gas Pedal (length of fix), front-rear spoiler, straps without screwdriver
Stability
Conventional fastening: pump up to the required level of support. No limit.
Foot support
Very good support at high speed on-piste, off-piste and in parks.
Cushioning
Full EVA pad, comfort and maximum cushioning
TECHNICAL INFORMATIONS
After-sales parts list
ref 8576631: 2 front strap screws + 2 rear strap screws
ref 8751399: 4 front strap attachments
ref 8758288: 1 pair of front strap size M (size 36 to 41)
ref 8758289: 1 pair of front strap size M (size 42 to 48)
ref 8758280: 4 rear strap attachments
ref 8576639: 1 pair of rear M strap (size 3 to 7)
ref 8576638: 1 pair of front strap size M (size 42 to 48)
ref 8758284: 2 highback screws
ref 8758287: Gas Pedal screw
Programme/terrain
The Endzone 500 binding is a traditional and high-performance all-mountain/freestyle snowboard binding for going anywhere: on-piste, off-piste and even in parks, at any level. Its highback is flexible, making it more comfortable to use. Its full EVA pad provides good cushioning when landing jumps, and its highback adjustment lets you adjust the angle of the highback to suit your sensitivity
Adjustment options
The original settings are suitable for most users. But you can also adjust it as you see fit:
- The position of the spoiler (front, rear, side) by playing on the position of the screws that hold the spoiler or adjusting the angle on the back
-the length of the gas pedal, which is particularly useful for large feet and boot volume
-The position of the straps allows you to adapt to all feet or volume.
Stance, binding spacings
The stance is the distance between the 2 bindings in cm. It can be adapted according to your body shape but be aware that all snowboards have a recommended stance for bindings (shown by a mark between the binding inserts). If you want to position your feet further apart or closer together on the board, do the test to see if you are best placed.
How do I change my stance on the board?
For piste / off-piste boards:
If you want to tighten the feet then it’s best to move the binding forwards only.
On the other hand, If you want to move the feet apart then it’s best to move the binding backwards. The aim is to be a little further back to take the bends better on piste and to float on the powder snow.
For freestyle boards (symmetrical):
It is best to move the 2 bindings to remain centred on the board.
At what angle should I put my snowboard bindings?
For a freeride run, we recommend +18° at the front and 0° at the rear. For a versatile freestyle run, try +18° et -6°. The rear foot opening lets you change when riding switch. For pure freestyle runs, choose completely symmetrical angles such as +15° et -15° for example.
Angle choice on bindings is a very personal thing. Feel free to check out what others are doing and try out different options. You might be pleasantly surprised!
Don't forget to centre your boot on your board!
Disc bindings with 4 screws can slide along a single axis and generally have 3 possible settings. This setting is used to centre the boot on the snowboard and prevent the foot from protruding over the edge of the board too much (otherwise you will fall!). Make sure that your boot goes over the 2 sides of the board equally. You can also rotate the disc 90° to increase or decrease the stance in relation to that provided by the inserts. In this case, the bindings can’t be centred laterally.
What size should I choose for my snowboard bindings?
For SNB 500 bindings, we recommend: Size L = 42 to 47.
But just as you would always try on a shoe with your own foot, we strongly recommend trying on the bindings with your snowboard boots because, depending on the brand, a particular size of boot can vary in volume.
composition
composition
Chassis: 70.0% Polyamide, 30.0% Glass Fiber; Strap: 3.0% Ethylene Vinyl Acetate, 97.0% Thermoplastic Polyurethane; Buckles: 100.0% Aluminium; Screws: 100.0% Stainless Steel
Tips for storage and maintenance
Storage tips
Regularly tighten all the screws on the bindings.<br /> Storing for the summer: you can leave the bindings on the snowboard.
TESTS AND WARRANTY
Test product
All Decathlon's Snowboarding products are tested in real conditions of use for which they were designed. Under the snow, in the cold, in all weather conditions when snowboarding on powder, in the snowpark, or on the runs. Our design teams, product managers, engineers and pattern makers ensure the product's design corresponds perfectly to its real-world use.
Warranty
2 Years
Agree by
Dedicated snowboarders. Are you interested in become one of our testers? Contact us on our website!