INFLATABLE SUP WING FOIL BOARD - 135L 6'0
Store Availability
Store Availability
BENEFITS
Compact design
Once folded the board fits in a bag the size of a sports bag (77 L)
Easy transport
7.2 kg With 3 handles to carry your wing or paddle
Glide performance
Double concave nose and semi-rigid rail for easy take-off
Rigidity
Reinforced woven Dropstitch and a flexible carbon stringer
Stability
Wide 30'' (76 cm) board for greater stability
TECHNICAL INFORMATIONS
How to choose the right board volume
The ideal volume depends on the skill level and size of the rider.
The foil provides a lot of stability, and is generally recommended for a beginner, taking the equivalent of their weight + 40 L. The higher the skill level of the rider, the lesser the board volume required.
This 135-litre board is recommended for:
- 70 kg: ideal board for easily getting into the sport
- 70 to 90 kg: board suitable for intermediate levels
- Over 90 kg: board for advanced users only
Technical specifications
Inflated dimensions:
Length: 183 cm (6.0')
Width: 76 cm (30'')
Thickness: 12 cm (5")
Weight: 7.2 kg (+/ -0.5)
Volume: 135L
Folded dimensions (in its bag): 85x45x20cm. Volume: 77 L
An ULTRA-COMPACT board
Shape
This hydrofoil board is very versatile and can be used for SUP foiling and WING foiling. The slightly refined outline and pulled in tail help you pick up speed at take-off.
Its nose has a double concave tip that makes take-off easier by reducing the suction effect on the surface of the water. It also helps you recover from touchdowns.
The tail has a semi-rigid rail to help channel away water during take-off.
Construction
This board is made from reinforced woven Dropstitch with high stiffness and low weight. A flexible carbon and tarpaulin sandwich stringer on both sides of the board increases the stiffness of the board.
INFLATING the board
This board has a NEW GENERATION valve that is even more secure.
To inflate your HYDROFOIL, take the board out of the bag and lay it out on flat and clean ground with the pad facing downwards. It has been designed so that it no longer has to be turned over to ensure that the foil can be fitted safely.
Open the cover and connect the pump ("IN" mode).
Inflate to 17 psi for best results.
Disconnect the pump and close the outer cap.
FITTING THE FOIL
This board has a universal foil (UFT) assembly system with double US boxes.
Position the foil following the instructions provided with it.
The foil position can be adjusted according to whether you want a fast take-off or a controlled take-off (see paragraph "ADJUSTING THE FOIL").
WARNING: Do not use foil screws that touch the bottom of the double US box, as this could damage it and reduce its robustness.
ADJUSTING THE FOIL
The double US box lets you adjust the position of the foil backwards or forwards.
The positioning of the foil depends on your build and the power of the foil. By default, position the foil in the middle of the box.
The further forward the foil plate is placed in the box, the faster the board will take off.
The further back the foil is placed, the more gentle the take-off will be
Once in flight, your legs should be pushing down with the same force on both the front and the back leg
Carry bag
BITON fabric bag
Height: 85 cm
Width: 45 cm
Thickness: 20 cm
approx. 77 L
The bag has space for a pump, a paddle and a wing so that you can carry everything on your back with ease.
Inner pocket for screws and compression system included
Leash and Footstraps
Always wear your leash to stay attached to your board if you fall. It’s best to attach it to your ankle, but it can also be attached to the knee.
Remove it and rinse after each use.
PLEASE NOTE: do not use a leash on rivers
FOOTSTRAPS: it is possible to add 2 footstraps at the front (not included). (product code: 8556860).
When learning, it is recommended not to use footstraps but to wait until you have mastered the skill.
Accessories
Included with the boards:
- carry bag
- 5'5 straight leash
- 2 repair patches
- 8 M5x15 footstrap screws
- 1 user guide
Paddle and pump not included, we recommend visiting our website to choose your equipment
OUR BOARDS CAN BE REPAIRED
The vast majority of inflatable boards are repairable:
For small repairs, we sell a stand up paddleboard repair kit, reference 8512384.
For more complex repairs: we recommend contacting the workshop at your nearest store: valve, handle, box... our workshops can repair them all to prolong the life of your inflatable boards.
Foilsurfing requires an already good level of surfing, SUP, or traditional kitesurfing.
Independence in relation to the choice of location, analysis of the weather conditions, awareness of the associated risks, ability to read the waves or anticipate manoeuvres are required for safe and foilsurfing.
Respecting the right of way and rules of conduct is necessary.
Foil surfing is still a dangerous sport. Several precautions must be taken.
Using a neoprene wetsuit, helmet, booties and an impact waistcoat is highly recommended. A leash must be used.
Foilsurfing remains a dangerous sport and learning it requires several precautions. You are strongly advised to get started within an organisation specialised in teaching foilsurfing.
Carefully read the instructions provided (please keep these) and respect the rules in place.
composition
composition
Main fabric: 70.0% Polyvinyl Chloride, 30.0% Polyester; Carry bag: 100.0% Polyester; Foam: 25.0% Ethylene Vinyl Acetate, 75.0% Polyethylene; Base: 20.0% Glass Fiber, 80.0% Foamed Polyurethane
Tips for storage and maintenance
Storage tips
Store deflated, flat and away from sunlight, after first removing the foil and leash. If storing inflated, release some of the pressure and store in a flat position without any load
TESTS AND WARRANTY
Warranty
2 Years