A RELIABLE AND HIGH PERFORMANCE CARBON FRAME
Excitement guaranteed by the carbon frame of this gravel bike: fast, precise, it ensures comfortable steering and helps you improve your speed. Designed for electric groupsets, only the brake cable housings run through the inside of this UCI-certified frame. Its tube cross-sections have been optimised for better lateral rigidity... but it doesn't sacrifice flexibility, which you need for absorbing the terrain!
● Frame weight in size M: 1058g
CHOOSING THE SIZE OF YOUR GCR
We designed this frame to fit the following heights:
Size S: 156/170
Size M: 168/180
Size L: 178/190
Size XL: 188/200
If you're between two sizes, base your choice on your preferences. Looking for compactness, responsiveness, weight and a certain look? Choose the smaller size.
Stability and comfort (back, neck)? Opt for the larger size.
The Reach value (find on photo 2) is important to consider in relation to your personal preferences.
A CARBON FORK FOR EFFECTIVE STABILITY
Essential to your comfort, the carbon fork contributes significantly to the playfulness of this gravel bike and ensures extremely precise steering. Since the carbon improves with the stiffness and the flexibility of the front of the bike, this fork provides good stability for your rides and combines fun, performance, and reliability.
● Thru axle: 12 x 100 mm for the fork, 12 x 142 mm at the rear.
● Fork weight: 442g
SRAM FORCE XPLR AXS DRIVETRAIN: THE TECHNOLOGICAL MUST-HAVE
Our gravel bike is equipped with the new 12-speed SRAM Force XPLR AXS groupset: its 100% wireless connectivity is a revolution in cycling. Thanks to this complete drive train where each module can be replaced independently, you can discover the joy of simple, fast, and precise gear changes. Finally, customise and analyse the data from your bike with SRAM's intuitive app.
SHIFTER: SRAM FORCE AXS
DERAILLEUR: SRAM FORCE XPLR AXS
CHAIN: FORCE 12 S
WITH THE 40T CHAINSET AND 12-SPEED CASSETTE, YOUR EFFICIENCY WILL ALWAYS BE THE BEST!
With the 40-tooth SRAM Force AXS chainset and the SRAM Force 10-44 12-speed cassette, you get a larger range of gears for riding as efficiently as possible on both flats and hills!
For your information, here are the different crank sizes:
● S: 170 cm
● M: 172.5 cm
● L/XL: 175 mm
To add a speedometer, click this SRAM link (QR code on the bottom bracket):
https://www.sram.com/en/sram/models/pm-axs-spdr-d1
REYNOLDS CARBON WHEELS: PERFECT FOR PERFORMING!
The REYNOLDS 4.1XL 700 carbon wheels (40 mm) are lightweight, responsive and sturdy.With their inner rim width of 23 mm, these wheels are perfect for wider tyres. They're specifically designed for gravel, with their 24 steel spokes, and are of course tubeless ready. Weight: 1685 g
We advise you to register your wheels with the manufacturer in order to benefit from their 2 year warranty for the complete wheel and lifetime warranty for the rim.
VERSATILE HUTCHINSON TOUAREG TYRES
We chose to equip our carbon gravel bike with Hutchinson Touareg 700 x 40 mm tyres for their versatility and flexibility. Originally installed tubeless, you'll need to add the sealant provided with the bike yourself. The even, grippy design of this tyre excels on dry ground, but is not recommended on very wet terrain.
The sidewalls are reinforced to help the tyre withstand impacts and stones.
127 TPI carcass
TUBELESS ASSEMBLY FOR GREATER RELIABILITY AND PUNCTURE RESISTANCE
The wheels are set up as tubeless, but come WITHOUT SEALANT!
You'll need to add the sealant directly into the valve, after deflating the tyre and removing the valve cap. Note that the bottle of sealant provided with the bike is enough for both tyres (60 ml of product per tyre). To finish, fully tighten the valve cap and reinflate the tyres to the desired pressure, between 1.8 and 3 bars maximum.
MAXIMUM CLEARANCE FOR TYRES
The maximum size for tyre width is 42 mm.
HYDRAULIC DISC BRAKES
This carbon gravel bike comes with SRAM Force hydraulic brakes. We chose this system because the braking power provided by the hydraulic disc brakes allows you to perfectly control your bike and adds steering comfort in all conditions. No need to force your brakes to slow down: braking is smooth, progressive, and precise!
● Front disc: 160 mm
● Rear disc: 160 mm
FOCUS ON THE HANDLEBAR AND STEM
Our carbon gravel bike is equipped with an oversize aluminium ERGO handlebar with a 16° flare, meaning the angle between the vertical part and the side of the handlebars. For a size S, the handlebar width will be 400 mm, for a size M/L, 420 mm, and for a size XL, 440 mm.
For our carbon gravel bike, we opted for an oversize ERGO aluminium stem. Here is the stem sizing in detail:
● S: 80 mm
● M: 90 mm
● L: 100 mm
● XL: 110mm
Saddle and seat post
Our carbon gravel bike is fitted with the Fizik Argo Terra X5 saddle. This ergonomic saddle provides comfort and stability, while limiting pressure points and absorbing vibrations during rides.
The seat post is aluminium and has a diameter of 27.2 mm. For size S/M, the seat post is 350 mm long, and for size L/XL, it is 400 mm long.
SRAM SHIFTERS AND DERAILLEUR BATTERY
The derailleur battery and SRAM charger are provided with the bike. SRAM says that the battery will last about 20-40 hours (500-1000km) and we recommend that you fully charge it before using your carbon gravel bike for the first time.
We recommend recharging it at least once a month.
The shifter batteries are directly integrated by SRAM and synchronized with the derailleur during assembly, so you don't have to do anything.
Weight
This Force/Reynolds configuration (without pedals or sealant) weighs approximately:
GCR Force/Reynolds S: 8.2 kg
GCR Force/Reynolds M 8.25 kg
GCR Force/Reynolds L 8.5 kg
GCR Force/Reynolds XL 8.7 kg
The maximum load is 110 kg regardless of the size of the bike.
BIKE QUALITY ASSURANCE
Quality is in our DNA!
Each bike is fully assembled on a stand by the same person at our B'Twin Village plant in Lille, France.
Each person is committed to ensuring the quality of every bike they assemble.
For example, each screw is tightened with a connected torque wrench that provides very detailed quality monitoring (recommended and actual tightening torque, who does it and when). You will have access to these data from the first quarter of 2023.
LITTLE THINGS TO KNOW ABOUT THE RIVERSIDE SRAM CARBON GRAVEL BIKE
Your GCR comes with a box that includes:
- Traditional pedals: we recommend the use of clipless pedals to get the most from your bike.
- 1 bottle of tubeless preventive sealant for both wheels + the tool to tighten/loosen the valve.
- 2 hydraulic brake blocks (the second is mounted on the bike in the original packaging).
- 1 bike bell
- 1 front and rear light.
- 1 torque wrench.
Care tips
We recommend avoiding high-pressure water jets when washing your carbon gravel bike to avoid damaging it. We recommend cleaning your Riverside SRAM Carbon Gravel bike after each ride, particularly after confronting particularly muddy or dusty terrain. In addition, remember to check your tyre pressure and braking efficacy before each ride.