Shorty long-sleeved briefs with front zip PALMDARK
Store Availability
Store Availability
BENEFITS
Easy dressing
the front zip makes changing in and out of it easy
Freedom of movement
More flexible neoprene on the upper body and arms. Stretch seams.
TECHNICAL INFORMATIONS
YOU ARE AN INTERMEDIATE SURFER
You regularly go surfing. During your sessions, you paddle out to the line-up, duck dive under the breaking waves if you are on a shortboard, or turtle roll if you are on a longboard, then surf waves of less than one metre. You often fall and are used to being shaken about underwater. Your swimsuit must meet the requirements of your activity and stay in place for each of your movements. We have designed a range for you that is suited to regular activity and your body shape.
How to choose the right wetsuit (Part 1)
The first selection criterion when choosing a surfing wetsuit is the water temperature.
Water temperature varies according to the location and the time of the year.
Systematically make sure that the water temperature at your spot corresponds to the recommended temperature range:
Water warmer than 20°C.
Water between 17 and 22°C.
Water between 12 and 17°C.
Water between 7 and 12°C.
Visit the site seatemperature.org to find out the temperature of your spot.
How to choose the right wetsuit (Part 2)
The 2nd criterion to take into account is the length of your sessions. If your sessions last less than an hour, the 100 models will be suitable. For up to 2 hours, opt for the 500 models and for up to 3 hours, the 900 models. Compared to the 100 models, the 500 models will be warmer and more efficient at reducing fatigue (more freedom of movement) and irritation. The same is true for the 900 models compared with the 500 models. NOTE: the 900 models are easier to put on.
Choose the right size
To make the most of the features of your wetsuit, it is necessary to choose the correct size. A surfing wetsuit should be a very tight fit and there should be no visible folds. When dry, it is perfectly normal to feel like it is too tight, this discomfort disappears as soon as the wetsuit gets wet.
FASTENING
Our zips and fastenings are laboratory tested in order to ensure an optimal lifespan and good resistance to salt water. We have put the zip at the back of the wetsuit for more comfort during surf sports (when lying down to paddle).
An outfit for every temperature range
When we are in the water, we lose more than half of our body heat through our extremities (feet, hands, head). Consequently, here are the recommended accessories:
- In water > 17°C: Low neoprene shoes.
- In water between 12 and 17°C: High booties (boots) and gloves.
- In water between 7 and 12°C: High booties (boots), gloves, hood and hooded top.
OLAIAN, DECATHLON'S SURF BRAND
Based in Hendaye, in south west France, OLAIAN is Decathlon's new surfing and bodyboarding brand. In our offices at the water's edge, we can design a swimsuit or wetsuit and then on the same day test it directly in the sea to check it stays in place in the waves.
GUARANTEE
2 YEARS
composition
composition
Foam: 100.0% Rubber; Main fabric: 100.0% Polyamide; Upper part - Main fabric: 11.0% Elastane, 89.0% Polyester; Outside shell - Secondary lining: 16.0% Elastane, 84.0% Polyamide
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
TESTS AND WARRANTY
Test product
Developed and tested by our design teams in Hendaye, France. The components used for this product are laboratory-tested to ensure the best possible quality and durability.
Warranty
2 Years
Videos
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 11% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.