Men's waterproof fishing jacket - FJ 500 WPF grey/black
Store Availability
Store Availability
BENEFITS
Ease of use
Spiral cord Large pockets for storing boxes and accessories
Lightweight
Weight size L: 850 g
Resistance to salt water
Main zip with large links (resistant to salt)
Windproof
Entire component windproof Tightening in lower part to reduce air entry
Waterproof
Waterproof component: 15000 mm Taped seams
Pockets
7 pockets including 1 inner pocket
Breathability
Breathable fabric to air our perspiration (R.E.T=9)
Resistant to wild vegetation
Durable ripstop component in lower part and elbow areas
TECHNICAL INFORMATIONS
POCKETS
. 2 large chest pockets, 1 with spiral cord
. 2 pockets with waterproof zips
. 2 hand pockets with large-link zips and flaps
. 1 inner pocket with zip for your personal belongings
FEATURES
An adjustable hood
. A rear loop to hang your landing net
. A spiral cord retractor with a carabiner to keep your scissors handy (you can leave them on the outside or store them inside the pocket)
. Zips with large links for better resistance to salt
. Cuffs with muffs to limit air and water entering + a tightening system
. Tightening in lower part to reduce air entry
COMPOSITION
Waterproof Polyester component reinforced at the shoulders and elbows
CUT
Quite loose which allows you to be at ease and fits every size
WATERPROOFING WATER COLUMN TEST (known as the “Schmerber” test)
The strength of a fabric is measured in water pressure, expressed in mm water column (test based on the JIS 1092B standard). The greater the pressure, the more the fabric is waterproof.
With a waterproofing index of 15000 mm, our 500 jacket is highly waterproof.
A component with a waterproofing index of 15000 mm can withstand a pressure of 1.5 bar.
WATERPROOFING SHOWER TEST:
In our eyes, this test reflects real-life conditions the best because products designed with a waterproof fabric could let in water through the seams, flaps or zips.
In the test, the products are put under a shower in order to test their overall waterproofing capacity.
Our 500 jacket protects your from a heavy downpour (30cm of rain in 3 hours)
BREATHABILITY R.E.T TEST
The breathability is measured by the Water-Vapour Resistance (Ret) coefficient. It measures the a fabric's resistance to wicking away moisture. The lower this resistance (and therefore the coefficient), the more breathable the fabric is! (Test based on the ISO 11092 standard).
Our 500 jacket has an index of 9 and is therefore breathable and perfectly suited to a level of exertion
composition
composition
Main fabric: 100.0% Polyester; Yoke: 100.0% Polyester; Lining: 100.0% Polyester; Secondary lining: 100.0% Polyester; Cuff: 20.0% Elastane, 80.0% Polyamide; Membrane: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store in a dry place and avoid putting them on a heat source such as a radiator, as it could damage the membrane or breathable coating.
TESTS AND WARRANTY
Test product
Our jackets have been tested in a range of conditions to ensure that they are strong and durable. They were also subjected to numerous mechanical tests in the laboratory, in particular shower tests which confirmed their waterproofing in different types of rain.
Warranty
2 Years