Fishing Wader Boot Soles
Store Availability
Store Availability
BENEFITS
Anatomic design
The soles can be cut to fit to the size of your wader boots
Cushioning
The polyurethane foam helps reduce impacts and vibrations
Warmth
The warm lining improves insolation from the ground
Fitting comfort
The sole's preformed shape and its lining add extra comfort
Stability
The sole's preformed shape improves support while walking
TECHNICAL INFORMATIONS
FITTING AND CUTTING SMALLER SIZE
These soles cover several shoe sizes. It is vital to cut them to perfectly fit your wader boots.
If you are the smaller size of a two-sized boot (for example, EU size 42 for a size 42/43 boot):
- Cut the sole according to the guide provided that matches your waders.
- Then directly insert the sole into your boots.
FITTING AND CUTTING LARGER SIZE
These soles cover several shoe sizes. It is vital to cut them to perfectly fit your wader boots.
If you are the larger size of a two-sized boot (for example, EU size 43 for a size 42/43 boot):
- Remove the original sole.
- Cut the sole using the former sole as a guide or using the guide provided to match your waders.
- Then, insert your new sole where the former one was.
SIZES
2 sizes available:
EU size 40/43 fit on our waders with size 40/41 and 42/43 boots
EU size 44/47 fit on our waders with size 44/45 and 46/47 boots
COMPOSITION
Total thickness: 6 mm
Foam 5 mm: 100% Polyurethane
Warm lining 1 mm: Acrylic wool
composition
composition
Warm lining: 100.0% Polyester; Outer sole of: 100.0% Foamed Polyurethane
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
Storage tips
Remove the sole after use to dry and avoid it smelling bad. Store in a clean, dry place away from light
Restrictions on use
Do not machine wash.
TESTS AND WARRANTY
Warranty
2 Years