WOMEN’S SKI JACKET FR100 – BURGUNDY
Store Availability
Store Availability
BENEFITS
Anatomic design
3D hood adjustment that can be put over the helmet and follows your movements
Freedom of movement
Loose fit and stretch components that follow all your movements
Adjustable
Tightening - cuffs with velcro. 3D adjustable hood. Adjustable snow skirt
Warmth
150 g/sqm wadding (chest) 60 g (arms) protects from the cold, vents regulate
Waterproof
10,000 mm membrane (Schmerbers) and taped seams. Waterproof zip
Pockets
5 pockets: 2 hand, 2 chest (1 inner, 1 outer), 1 ski pass on the arm
Breathability
RET12 breathable membrane, vents help to wick away perspiration
TECHNICAL INFORMATIONS
Additional features
Hood over helmet designed to offer maximum protection ensuring freedom of movement.
Adjustable to fit 3 sizes in a single movement, using a single tightening toggle located behind the head.
Tightening on the wrist and cuffs to prevent air and snow from getting in.
Tightening at the bottom of the jacket and snow skirt to also prevent air and snow from getting in.
Water repellency
Water-repellent fabric allows water to run off its surface without seeping in. This prevents the fabric from becoming waterlogged and remain light, breathable and warm. A fabric is made water-repellent by applying a treatment to its outer surface. This treatment needs to be reactivated during the lifetime of the garment when it is washed.
All Wedze jackets have received a water-repellent treatment.
Component waterproofing
The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A component with a waterproof rating of 5,000 mm can therefore withstand the pressure exerted by 5,000 mm of water.
Breathability of a component
To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric's resistance, the more water vapour generated by physical activity can escape and the higher the fabric's breathability.
For example:
RET < 9 = extremely breathable fabric
9 < RET < 12 = very breathable fabric
12 < RET < 20 = breathable fabric
RET > 20 = little or no breathability.
What is a membrane or coated component?
The coating is akin to a paint applied inside the fabric that makes the component waterproof while remaining breathable. It is often less expensive than a membrane and requires a liner to protect it. The membrane is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. It has the advantage of being more flexible, lighter, more resistant and often more breathable than a coating.
How do we make a garment waterproof?
The waterproof properties of the garment are related to its fabric, seam sealing and assembly design.
Using a waterproof ZIP or adding a flap to the zip (covers the zips with a waterproof fabric flap).
Waterproofness/Shower test
This garment has been validated in a shower test under 60 L of water / sqm / hour for 2 hours. This test reproduces the conditions of a rain shower in the mountains.
How do we make a garment breathable?
In addition to the breathability of the fabrics used, we employ technical solutions (zips, vents, mesh) improving the overall ventilation of our jackets and trousers designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity.
Your product is repairable
This product is repairable.
We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store.
If, however, we can’t repair your product (non-repairable production defect), you can exchange it or get a refund.
What is the RECCO® system?
All our Freeride jackets and trousers are equipped with the RECCO® system.
With RECCO® technology, you can be located in the event of an avalanche. Someone who is equipped with RECCO® reflectors and is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker. RECCO® reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time.
Tutorial on how to wash your waterproof garment
We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment.
Link: https://youtu.be/rh4GLwALgBM
After three washes, restore the water repellent properties with a waterproof spray or wash-in product.
Weight
0.94 kg in size M
To help you choose the right size
The model on the photo is wearing a size M and measures 175 cm.
Measurements:
Chest measurement: 92 cm
Waist measurement: 66 cm
Hip measurement: 89 cm
composition
composition
Main fabric: 100.0% Polyester; Padding: 100.0% Polyester; Main lining: 100.0% Polyester; Lining: 100.0% Polyester; Secondary lining: 9.7% Elastane, 90.3% Polyester; Yoke: 100.0% Polyester; Coating: 100.0% Polyurethane; Cuff: 18.0% Elastane, 82.0% Polyester
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Dry this waterproof protective garment thoroughly before storing it.
TESTS AND WARRANTY
Test product
Our team of designers is based at the foot of the Mont-Blanc, near many ski resorts in Haute-Savoie (France). All year round, we create and develop products that are simple and technologically advanced. These are then ruthlessly tested in the field, because we believe that the only way to continuously improve our products is to test them under the real-life conditions that you will experience in use.
Warranty
2 Years