MEN’S SKI JACKET FR100 – NAVY BLUE
Store Availability
Store Availability
BENEFITS
Anatomic design
3D hood adjustment that can be put over the helmet and follows your movements
Freedom of movement
Loose fit and stretch component that follow all your movements
Adjustable
Tightening - cuffs with velcro. 3D adjustable hood. Adjustable snow skirt
Warmth
The wadding protects from the cold and ventilation regulates
Waterproof
10,000 mm membrane (Schmerbers) and taped seams. Waterproof zip
Pockets
5 pockets: 2 hand, 2 chest (1 inner / 1 outer), 1 ski pass on the arm
Breathability
RET12 breathable membrane, vents help to wick away perspiration
TECHNICAL INFORMATIONS
Additional features
Hood over helmet designed to offer maximum protection ensuring freedom of movement.
Adjustable to fit 3 sizes in a single movement, using a tightening system located behind the head.
Tightening on the wrist and cuff to keep air and snow out.
Tightening at the bottom of the jacket and snow skirt to also prevent air and snow from getting in.
Component waterproofing
The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A fabric with a waterproof rating of 5000 mm is therefore resistant to the pressure exerted by a 5000 mm column of water
Water repellency
Water-repellent fabric allows water to run off its surface without seeping in. This prevents the fabric from becoming waterlogged and remains light, breathable and warm. A fabric is made water-repellent by applying a treatment to its outer surface. This treatment needs to be renewed during the lifetime of the garment (we recommend every 3 washes). All Wedze jackets have received a water-repellent treatment.
Breathability of a component
To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard).
The lower the fabric's resistance, the more water vapour generated by physical activity can escape and the higher the fabric's breathability.
For example:
RET < 9 = extremely breathable fabric
/ 9 < RET < 12 = very breathable fabric /
12 < RET
< 20 = breathable fabric / RET > 20 = little or no breathability
What is a membrane or coated component?
The coating is akin to a paint applied inside the fabric that makes the component waterproof while remaining breathable. The membrane is a kind of very thin plastic film (polyurethane) that requires a lining to protect and make the component waterproof while remaining breathable. It has the advantage of being more flexible, lighter, more durable and often more breathable than a coating.
How do we make a garment waterproof?
The waterproofing of the garment is related to its fabric, seam sealing and assembly design.
Using a waterproof zip or adding a flap on the zips (covering the zips with a waterproof fabric flap).
Waterproofness/Shower test
This garment has been validated in a shower test under 60 L of water/sqm/hour for 2 hours. This test reproduces the conditions of a rain shower in the mountains.
How do we make a garment breathable?
In addition to the breathability of the fabrics used, we employ technical solutions (zips, vents, mesh) improving the overall ventilation of our jackets and trousers designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity.
What is the RECCO® system?
All our Freeride jackets and trousers are equipped with the RECCO® system.
With RECCO® technology, you can be located in the event of an avalanche. Someone who is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker and reflectors. RECCO® reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time.
Tutorial on how to wash your waterproof garment.
We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment.
Link: https://youtu.be/rh4GLwALgBM
After three washes, restore the water repellent properties with a waterproof spray or wash-in product.
To help you choose the right size
The model is wearing a size L and measures 180 cm.
Measurements:
Waist size: 85 cm
Hip measurement: 100 cm
Chest size: 100 cm
Weight
1.06 kg in size L
composition
composition
Main fabric: 100.0% Polyester; Padding: 100.0% Polyester; Main lining: 100.0% Polyester; Secondary lining: 9.7% Elastane, 90.3% Polyester; Lining: 100.0% Polyester; Pocket: 24.0% Elastane, 76.0% Polyester; Yoke: 100.0% Polyester; Coating: 100.0% Polyurethane; Cuff: 18.0% Elastane, 82.0% Polyester
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Dry this waterproof protective garment thoroughly before storing it.
TESTS AND WARRANTY
Test product
Our team of designers is based at the foot of the Mont-Blanc, near many ski resorts in Haute-Savoie (France). All year round, we create and develop products that are simple and technologically advanced. These are then ruthlessly tested in the field, because we believe that the only way to continuously improve our products is to test them under the real-life conditions that you will experience in use.
Warranty
2 Years
Videos
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
MaterialRecycled polyester
Product made from 70% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
ProcessDope dyed
Product made from 11% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.