Ultra-compact and stable 10-foot (max. 130 kg) SUP - white and blue
Store Availability
Store Availability
BENEFITS
Compact design
This incredibly compact board fits into a small 30 L backpack.
Easy transport
ULTRA COMPACT: TAKE IT ON YOUR BACK, ON FOOT, BY BIKE OR SKATEBOARD, ETC.
Weight
8 kg! Lightweight and easy to handle, from carrying in your bag to launching.
Stability
Designed for a maximum weight of 130 kg. Maximum load for buoyancy: 315 kg
User comfort
Foam deck for comfort and grip. Split in half for folding
Instructions
DownloadTECHNICAL INFORMATIONS
Recommended user weight and maximum load
Recommended user weight:
Less than 60 kg: ultra-stable board.
60 to 80 kg : very stable board.
Over 80 kg: ideal board for easily starting out.
CAN BE USED BY MORE THAN ONE : 1 adult + 2 kids or 2 adults (seated/standing)
Maximum load to not fall in the water: 315 kg.
Inflating & deflating the Stand Up Paddleboard
INFLATION:
The SUP is equipped with a new-generation valve to guarantee even more security.
To inflate your SUP, open the cap and connect the pump (“IN” mode).
Inflate to 15 psi for best results.
Disconnect the pump and close the outer cap.
DEFLATING:
Turn the cap a quarter clockwise (“OUT” mode).
Roll, starting from the opposite side to the valve to remove all the air for tight folding.Close the cap.
FOR A COMPACT FOLD, FOLLOW OUR METHOD
Completely deflate the board.Roll up the product a first time to expel the air through the open valve.
Unroll the board and lay out flat. Fold it lengthways with the fin bases positioned outwards.
Roll up from front to back.
Use the compression strap to keep it rolled up and help you fit it into the bag.
For more details, check out our videos online available on the product page.
Fins and fin bases
2 118 mm fins for paddling in shallow water.
Available from our after-sales service and online if lost or broken (8502106)
Remember to remove the fins once you get off the water.
For your safety, protect your hand if you need to apply force to the rear of the fin to remove it in the event of blockage with sand.
If possible, rinse the bases of the fins before and after using the stand-up paddle board for easier fin installation and removal.
Technical dimensions
INFLATABLE BOARD:
Length: 10' (305 cm)
Width: 35" (89 cm)
Thickness: 6" (15 cm)
Volume: 325 litres
Weight: 8 kg (-10%)
When folded:
Height: 60 cm
Width: 38 cm
Thickness: 22 cm
30 L (approx.) carry bag that can hold the pump and paddle on the outside.
OUR BOARDS CAN BE REPAIRED!
We have a stand-up paddleboard repair kit, reference 8512384.We recommend that you contact the workshop of your local store for all repairs.
We can repair bases of the fins, handles, valves and significant leaks
Leash
Very lightweight leash that you won't even know is there during use and is easy to store.
Always wear your leash to stay attached to your board if you fall. To avoid damaging the leash and leaving marks on your folded board, remove and rinse after each use.This leash attaches to the ankle.
PLEASE NOTE: don’t use the leash on the river.
Bag contents
Storage backpack
Compact board L
Fins X2
Leash
Instructions
Repair patch
Directions for use
We recommend:Using a buoyancy aid jacket (reference 8501295) or a buoyancy aid belt (reference 8600104)
Not suitable for paddling further than 300 m from shelter.Don’t use the leash on the river.Notify someone of your trip and your whereabouts.Research to find out if there are any local navigation rules that apply to the location of your trip.
COMPACT BOARD STORAGE
Store deflated, flat and out of sunlight, after first removing the fin and leash. If storing inflated, release some of the pressure and store in a flat position without any load.
Excluding transport, you don’t need its extreme compactness, preferably storing it inflated or rolled lengthways.
BACKPACK
A redesigned volume for easier storage.
Foam carry straps for more comfort.
A side pocket to attach our compact paddle (8643049)
Two elastics to attach your pump.
Safe storage
Never leave your board out of the water in direct sunlight.
If you have to leave your board in the sun, we recommend keeping it away from any sources of heat (walls, floors, car roofs, etc.) and reducing the pressure to 10 psi in order to prevent overpressure and irreversible damage (explosion, delamination, leaks, etc.).
composition
composition
Main part: 70.0% Polyvinyl Chloride, 30.0% Polyester; Foam: 25.0% Ethylene Vinyl Acetate, 75.0% Polyethylene; Carry bag: 100.0% Polyester
Tips for storage and maintenance
Storage tips
Roll up and the product once completely dry and store in its bag for long-term storage.If you have no shortage of storage you can store the inflated product flat.
Restrictions on use
Not suitable for paddling further than 300 m from shelter.
TESTS AND WARRANTY
Parts guarantee
2-YEAR guarantee. Availability of spare parts essential to the use of the product: 10 years