Women’s Snowboard Jacket ZIPROTEC Compatible SNB 500 - beige
Store Availability
Store Availability
BENEFITS
Compatibility
ZIPROTEC technology: zip on your back protector (sold separately)
Freedom of movement
Loose fit for more freedom of movement with back protection
Adjustable
Adjustable cuffs, adjustable hood and snow skirt
Robustness
Components resist abrasion, tearing and traction force
Warmth
Faux-down wadding: Body section 100 g/sqm, sleeves and hood 80 g/sqm
Waterproof
15,000 mm coating (Schmerber), taped seams.
Pockets
6 pockets: 2 hand, 1 ski pass pocket, 1 chest, 2 inner pockets
Breathability
Breathable component and mechanical ventilation (RET < 12)
TECHNICAL INFORMATIONS
To help you choose the right size
The model wears a size M and measures 175 cm.
Measurements:
Waist size: 66 cm
Hip measurement: 89 cm
Chest size: 92 cm
ZIPROTEC technology making it easier to protect yourself
At DREAMSCAPE, we make it a point of honour to offer you products that make your life easier and protect you. The ZIPROTEC technology is used to combine your jacket and your Men's DREAMSCAPE DBCK 500 back protector. Saving you the need to decide what to put on in the morning, this jacket will protect you from inclement weather as well as any shocks experienced during falls.
How does my product warranty work?
This product is repairable. We commit to repairing your product free of charge during the 5 years of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store. However, if we can't repair your product (production defect), we will exchange it or reimburse you.
Find all the warranty details on our website: https://www.decathlon.co.uk/landing/warranty-information/_/R-a-a340014v
How can I be sure of the strength and durability of my jacket?
Our snowboard jackets are guaranteed for 5 years. We offer repairs locally if your jacket is damaged. Contact us on our website to find out more about how to get your product repaired.
We take particular care in choosing all the elements and assembly processes that make up our ski and snowboard jackets so they are as durable as possible.
Can I be sure my jacket will give me proper protection in bad weather?
To withstand bad weather (rain, snow, wind, etc.), the jacket has been developed with a component and assembly that keep the water out and reduce wind chill. The waterproof rating is measured by placing the product in a special shower that replicates the real-life conditions encountered by snowboarders during use. Finally, we have spent a few days snowboarding, in all conditions, to validate the waterproofing of the product.
Water often gets in through the seams. Does my jacket have taped seams?
In addition to the waterproof fabric, we reinforce the waterproofing of the jacket with taped seams. These are waterproof, adhesive strips taped to the inside seams of the garment to make it perfectly watertight. All the product's seams are taped.
What is the water repellent feature of my jacket for?
The water-repellent feature makes water run off the fabric without seeping in thanks to a treatment applied to its outer surface. The fabric does not soak up water and stays light and warm. This treatment must be renewed during the life of the product, after 2 to 3 washes on average, using the products available in our stores. All the waterproof jackets that we design for snowboarders are water-repellent.
"Coated" jacket: what are the advantages of this coating?
A breathable coating is a coating applied to a fabric in the form of a paste or liquid which creates a protective film. The breathable coating is a waterproof barrier that lets through water vapour produced by the body when snowboarding.
How will my jacket keep me warm?
To keep you warm, we use wadding insulation. Wadding is a synthetic component made from polyester which stores more or less air, depending on the length of the fibres. Wadding can be standard, hi-tech or silicone-coated, each with different properties (warmth, low weight, elasticity, etc.)
How should I dress to avoid getting cold in the mountains?
To make sure you stay warm and dry, we recommend using the 3-technical-layer rule:
- Layer 1 or a second skin, to stay dry.
- Layer 2 or an insulating layer, to keep the heat in.
- Layer 3 or a protective layer to protect against the elements.
How can I stop snow from getting in my jacket?
Our jackets have elasticated snow skirts that can be adjusted at the waist. If you fall or are in fresh snow, the seal keeps the snow out.
How to wash my jacket?
To optimise your jacket’s performance and durability, we advise the following:
* Machine wash at 30°, synthetic programme.
* Turn the product inside out.
* Add a small amount of detergent. No softener.
* We recommend you wring it by hand.
* Dry on a hanger in a warm, well-ventilated place.
Do not dry clean. Do not place on a radiator.
You can restore the water resistance of the outer fabric using a fabric waterproofing spray. Read the care label.
composition
composition
Main fabric: 100.0% Polyamide; Coating: 100.0% Polyurethane; Shoulder fabric: 100.0% Polyester; Lateral fabric: 100.0% Polyester; Padding: 100.0% Polyester; Lining: 100.0% Polyester; Secondary lining: 100.0% Polyester; Synthetic fur: 90.0% Acrylic, 10.0% Polyester
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store on a hanger and do not fold, as this can damage the fabric coating. Dry thoroughly before storing in a dry and well-ventilated place.
TESTS AND WARRANTY
Test product
All the Dreamscape snowboard products are tested in the real-life conditions of use for which they were designed: in the snow, cold and all the conditions encountered when snowboarding and skiing. Our design teams, product managers, engineers and pattern makers make sure that the programme for which the product is designed perfectly matches its use in the field.
Warranty
5 Years
Agree by
Passionate about skiing and snowboarding then you might be interested in becoming one of our testers? Contact us on our website!