Camping tent MH100 XL - 3-P - Fresh&Black
Store Availability
Store Availability
BENEFITS
Easy assembly / dismantling
Free-standing structure. Simple pole installation.
Easy transport
Dimensions of the bag: 59 cm x 20 cm x 20 cm / 24 L. Weight: 5.8 kg.
Capacity
195 X 210 cm bedroom. Max. useful height: 115cm. 1 storage area.
Waterproof
Waterproofing (Schmerber): Flysheet > 2000 mm. Groundsheet > 2400 mm rating.
Heat reduction
Side vents, mosquito net door and Fresh&Black fabric for sleeping properly
Darkness
FRESH & BLACK patented exterior fabric: 99% darkness even in broad daylight.
Wind resistance
Withstands 40 km/h winds (Force 5): validated in wind tunnels on rotating plate.
TECHNICAL INFORMATIONS
The Fresh & Black technology keeps the inside of your tent cooler and darker
Cooler and darker for better sleep!
Fresh & Black is a technology patented by Decathlon that allows us to reflect the sun's rays and insulate from the light thanks to specific materials.
This reduces the sensation of heat in the tent and makes it darker.
To get the most out of this technology, don't forget to ventilate your tent at night!
Pitching and striking the tent
This tent has a classic dome structure.
All you have to do is fit the tent poles with the bedroom, and then fit the flysheet on top.
Then, you have to add the 3rd tent pole for the storage area.
To strike the tent, the process is the same, but in reverse.
Mattress compatibility
Recommended tent with a self-inflating mattress or trekking mattress up to 65 cm wide.
We do not recommend using inflatable mattresses, that are more than 8 cm thick, in this tent.
Indeed, this greatly reduces the volume inside the tent and increases condensation inside.
Ventilation of the tent
So that air can flow and be replaced between the bedroom and the flysheet, and eliminate the natural condensation as much as possible, the tent has 1 air vent at the top, 2 mechanical air vents at the sides and 1 inner door with a mesh upper section.
Waterproofing of the tent
All our tents are validated in the laboratory and in the field to guarantee the waterproofing.
To do this, we put the entire tent under a 200 L/h shower for 3 hours.
The flysheet is made of 2000mm Schmerber PU-coated polyester and the groundsheet is made of 120g/m² polyethylene. All the seams are sealed with thermobonded tape.
Wind resistance
We test all our tents in a wind tunnel on a turntable to expose each side to the wind. A well-assembled tent with all the guy ropes properly deployed around the tent should remain habitable with a wind speed measured at 40 km/h near the ground (Force 5).
What does my product contain?
- 1 bedroom
- 1 waterproof flysheet
- 3 tent poles (2 black tent poles for the bedroom and 1 turquoise tent pole for the flysheet)
- 12 tent pegs
- 4 guy lines
- 1 bag
Warranty of your tent:
This camping tent was designed for occasional outdoor use (4 weeks per year) during your camping trips or in the countryside.
Continuous exposure to UV light over a period of several weeks can damage its textile part.
Our tents do not belong to the category of "garden furniture" and are not designed to be kept outdoors permanently.
To maximise the lifetime of your tent, it's important to store it properly when it is not being used.
5-year warranty.
Don't throw away, repair!
Our tents are great for camping at night.
Over time, they age and some parts may wear out or break.
To facilitate repairs, we keep a stock of parts (tent poles, flysheets, bedrooms, etc.) so that they can be easily replaced.
Don't throw away, repair !
Product design: our expertise
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie.
This location is a place where our teams (designers, product managers, engineers, etc.) can meet with outdoor sports enthusiasts.
A significant advantage for designing high-quality products and giving you access to all our expertise.
Where do our tents come from?
Created in our international design centre at the foot of the Mont Blanc in France, this tent is then manufactured and assembled by our suppliers in China, Vietnam and Bangladesh.
These are partners that have genuine expertise in making our tents and with whom we are in close collaboration.
composition
composition
Main fabric: 100.0% Polyester; Inside room: 100.0% Polyester; Floor mat: 100.0% Polyethylene; Pole: 100.0% Glass Fiber
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Storage: after use or cleaning, wait until the tent is perfectly dry before putting it away in order to avoid bad smells and mould.
Restrictions on use
Sleeping width: max. 65 cm per person.
TESTS AND WARRANTY
Test product
Our partner laboratories, as well as our own, contribute to the innovation and development of our Quechua tents. Extensive analysis and experience allow us to guarantee the technical nature of these products (wind resistance, waterproofing, durability).
Agree by
To meet your requirements, Quechua tents are tested in the conditions that you may encounter during your nights in camping or in the wilderness. Our teams, plus a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market. This allows us to guarantee a high-quality tent.
Parts guarantee
5 years. REPAIRS: All our tents can be repaired in the workshop of your local Decathlon store.
Videos
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
ProcessGreige
Product made from 41% undyed yarn
Using this finishing process enables us to reduce CO2 emissions linked to the production of undyed textiles by at least 53% compared to conventional dyeing.
-
ProcessDope dyed
Product made from 48% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
ProcessBiton
Product made from 5% yarn combining dyed and undyed fibres
Using this dyeing process enables us to reduce the CO2 emissions linked to the production of the dyed component by at least 39% compared to conventional dyeing.