Men’s mountain walking mid waterproof shoes MH500 – brown
Store Availability
Store Availability
BENEFITS
Lightweight
490g per shoe in size 43
Robustness
Rubber stone guard at the front and plastic at the back of the foot
Traction
5mm studs with good grip. Rubber sole with very good grip
Cushioning
Thick EVA foam midsole: comfort/protection from the ground.
Waterproof
Waterproof and breathable membrane lining: your feet dry for 8hr in all weather
Foot support
Weblock on 2 loops to hold the foot. Medium ankle height.
TECHNICAL INFORMATIONS
What frequency and intensity of hiking?
We have classified our products in terms of performance and features for 3 levels of Mountain Walking:
- occasional: around ten hikes per year of about 3 to 4 hours’ duration, less than 10km and less than 700m of elevation gain.
- Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km, 700 to 1200m of elevation gain per outing.
- Intensive: more than 20 times a year. More than 6 hours, more than 20 km, 1200 to 2000m of elevation gain per outing.
Outdoor Contact sole
New high-performance sole with our new exclusive rubber blend developed by our experts. More grippy, more durable. The sole is designed for better grip using 3D simulations and then laboratory tested to assess the coefficient of grip on different surfaces and conditions. Field tests in the mountains allow us to do the final validation with a panel of testers.
30% rubber
Waterproofing test
In a laboratory, the boot is immersed in water to mid-height on a mechanical arm that flexes to simulates a number of steps. With this test we can determine a time and number of km that the boot can walk while staying dry. Then we confirm in the field or under the rain, that the shoe meets its promises.
Extended waterproofing
To keep your feet dry, we advise you to use a waterproof gaiter or mini-gaiter to protect the top of your boots and prevent water, pebbles and sand from getting in.
We advise re-waterproofing your boots twice a year using a re-waterproofing agent (search for ‘waterproofing’ on our Decathlon website) which will help you restore the original water-repellent qualities and help prevent stains on the outside.
Which size should I select?
Some Decathlon stores have a test route.
1. Try on both shoes, standing up, with the socks worn for hiking.
2. Tighten the laces, taking care to correctly balance the tightening.
3. Check two points:
- the heel does not come up before the boot when you walk uphill.
- the foot does not slide and the toes do not press against the front when going downhill.
4. Try on several sizes and models.
Break them in gradually to adapt them to your foot.
How to prevent blisters
Blisters generally develop when the skin is weakened by friction. In order to prevent them from occurring, we recommend the following:
- Choose a shoe in your size.
- Wear suitable socks
- Tie and tighten your shoes properly.
- Make sure you tighten or loosen your laces accordingly while wearing your shoes, especially before starting a climb or a descent.
- Wear your shoes on a short trip for the first use.
Which socks?
A waterproof shoe will be less breathable than a non-waterproof shoe. Mid-length socks like the MH500, MH520 and MH900 are therefore preferable for absorbing perspiration and reducing overheating.
Optimise the capabilities of your shoes by replacing your insoles
The original insole in your boots is designed to accommodate most feet. A change of insole can bring:
1. Improved support: some soles are preformed or reinforced to better support the arch of the foot.
2. More comfort: the insoles can also provide heat and/or cushioning.
3. Longer life: restore the support and comfort of your shoes by replacing the insole each season.
How should you look after your boots?
- Leave to air dry.
- Remove dry mud with a stiff brush.
- Clean marks using a brush and some warm water
- Leave to dry
- Spray with a re-waterproofing product to restore the water-resistance to the upper.
Product design: our expertise
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie.
This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts.
A great asset for designing your mountain walking products and providing you with all our expertise.
composition
composition
Upper of: 20.0% Polyamide, 40.0% Leather - Bovine - Split, 40.0% Polyester; Lining and sock of: 100.0% Polyester; Outer sole of: 30.0% Synthetic Rubber, 70.0% Ethylene Vinyl Acetate
Tips for storage and maintenance
Storage tips
Store in a well-ventilated dark, dry place.
Restrictions on use
Do not use as Personal Protective Equipment.
TESTS AND WARRANTY
Test product
Our hiking shoes are first tested in our Decathlon Sportslab laboratory, based in Lille, which also contributes to the innovation and development of our Quechua products. It brings together several themes, each with their own area and technological tools.
Warranty
2 Years
Agree by
To meet your requirements, Quechua products are tested in the mountains in conditions you will encounter during your hikes. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.
Videos
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
MaterialRecycled polyester
Product made of 6% recycled polyester
We have incorporated recycled polyester into this product (instead of conventional polyester, which is itself derived from petrochemical plastic). What does this mean? In addition to being technical, this product has been designed taking into account its environmental impact: using recycled polyester means recovering and transforming products destined to be thrown away, such as production offcuts or plastic bottles, instead of using new oil resources.
-
MaterialRecycled rubber
Product made of 9% recycled rubber
Recycling rubber allows significant savings in energy and oil resources. Integrating recycled rubber therefore significantly reduces the environmental impact of the product.
-
MaterialEVA from sugarcane
Product made of 6% EVA from sugarcane
The use of biosourced EVA foam in the sole reduces the environmental impact of the product.
-
ProcessDry dyed
6% of the fabric color is made by a dyeing process that uses little water
The dyeing process does not use water because it is achieved with a machine using pressurized gas to set colour directly into the fabric.