Wader repair kit (Breathable and PVC)
Store Availability
Store Availability
BENEFITS
Ease of use
Cut out and attach the component with your iron in just a few seconds
Versatility
Repairs all multi-layer waterproof textiles (waders , jackets and trousers)
TECHNICAL INFORMATIONS
DIRECTIONS FOR USE
1. Turn your product inside out (repairs are made on the inside)
2. Position your product so as to reduce the tear or hole as much as possible
3. Cut the reparation component to the adequate size (allow a bit of margin for error)
4. Position the component over the hole (pay attention to the direction)
5. Place a piece of greaseproof paper over the components to protect them
6. Iron with a hot iron (level 3) for 45 seconds, paying particular attention to the edges
7. The reparation is complete
COMPOSITION
The set includes: 2 8 x 8 cm squares + one 12 x 12 cm square.
100% TPU
composition
composition
Main fabric: 100.0% Thermoplastic Polyurethane
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT DRY CLEAN.
Storage tips
Store in a sheltered, room-temperature place. Otherwise, the component piece may stick together
Restrictions on use
Not for use on neoprene and PVC waders.
TESTS AND WARRANTY
Warranty
2 Years