ADULT ALPINE FREERIDE FREE TOUR SKI BOOTS WEDZE FR500 LOWTECH FLEX 100
Store Availability
Store Availability
BENEFITS
Compatibility
Sole with inserts compatible with alpine skis gripwalk and ski touring
Customisation
Thermoformable liner for superior comfort
Easy to rotate
Skiwalk: 45° of travel in walking position, for easier climbing.
Cushioning
The PU shell gives good deformation and good energy transfer.
Warmth
Liner and insulating insole to preserve heat
Foot support
99 mm, standard to thin foot. Preformed ankle boot for optimal support
Flexibility
Rigidity: 100 flex, perfect for improving your freeriding
TECHNICAL INFORMATIONS
Thermoformable liner
Polyethylene liner, 3 mm thick thermoformable material. By heating your liner, you can compress the foam to make room and increase comfort. The bottom of the liner is in EVA, providing extra cushioning, great when the snow is hard or when landing jumps.
How to thermoform your liners at home
1- Preheat the oven to 80°C on fan mode.
2- Remove the liners from the shells.
3- Remove the insoles from your liners.
4- Put the liner in the oven for just 5 minutes.
5- Remove the liners from the oven.
6- Put the soles inside the liners.
7- Put the liners back into the boots.
8- Put on your boots and lock each buckle to the mid-way setting.
9- Wait for 15 minutes at room temperature before removing the boot.
There you go, you are ready to ski
Hook adjustment
4 Aluminium micrometric buckles for precise adjustment of the foot and calf size inside the shoe.
Wide strap for powerful and easy tightening at the top of the shell for a more effective tongue.
What is flex?
To provide an indication of rigidity, brands assign a flex rating to every boot. This figure indicates the rigidity of the whole boot: the higher the figure, the stiffer the shell. A flex of 70 is considered best for skiers at intermediate level. A flex from 70 to 100 is for intermediate skiers. Beyond this value, the products are aimed at advanced skiers. Heavy builds can, however, go up a level.
How to try on ski boots
Once the foot is in the boot, fasten the buckles to the midpoint. Can you go further? This means the volume of the boot isn't right for you. Once the boot is closed, you must flex the boots 3 times by pressing hard on the shins (put your hands on your knees to help) and push your heel backwards inside the boot. Stand upright: your foot should touch the end of the shell. When you flex, your foot should move backwards so you can no longer feel the end.
What should you do if you experience foot pain?
1/ Choose a technical skiing sock, fine to avoid areas of pressure and improve blood circulation in the foot.
2/ Choose a sole that is adapted to the shape of your foot to avoid crushing it and it touching the shell. Ask a salesperson in store for advice.
3/ Thermoform your liner 4/ Have the shell of your shoe twisted by a professional (bootfitter) after 3-4 outings to remove the final hard points
How to reduce the feeling of cold to your feet?
Although it is often forgotten, drying the liner is the most effective way to avoid having cold feet. Even at -10°C, the foot sweats and the liner cannot dry by itself in its plastic shell, even over several days. Ideally, it should be removed every day. There is the option to use boot dryers that are more convenient because there is no need to remove the liner, you just plug them in!
The size selection is also essential for the best fit
Weight
27-27.5 Mondopoint: 1792 g
composition
composition
Upper of: 40.0% Polypropylene, 60.0% Thermoplastic Polyurethane; Lining and sock of: 100.0% Polyester; Outer sole of: 100.0% Thermoplastic Polyurethane
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Dry your boots before storing them. Store them with the hooks closed in a ski boot bag in a warm room.
TESTS AND WARRANTY
Warranty
2 Years