Inflatable trekking mattress - MT900 air XL - 195 x 60 cm - 1-person
Store Availability
Store Availability
BENEFITS
Easy assembly / dismantling
Inflate with the built-in pump bag. Bi-valve: IN with anti-reverse - OUT deflate
Easy transport
Total weight 680 g (mattress alone 625 g). Volume: 3 litres. Travel bag
Thermal insulation
Use during the summer season. R-Value 1.4 according to standard ASTM F3340-18
Sleeping quality
Dimensions 195 cm x 63 cm x 8 cm. Rectangular shape. Smooth surface
Traction
Anti-skid silicone patches on both sides. Limits slipping
TECHNICAL INFORMATIONS
How to choose the size of your MT900 mattress
This model is available in L and XL version.
The difference between the 2 sizes on the length (180 cm for the L; 195 Cm for the XL) and width (56 cm for size L; 63 cm for the XL).
To choose the mattress that best suits you, you must consider your stature, but not just that.
Your preference and/or your preference for space around your shoulders should also be considered.
So, even if you are 1.75 cm, you will prefer the XL!
How to inflate your mattress
To prevent moisture from being blown into the mattress, we recommend that you use the pump bag in the pouch.
To do this, unroll the entire pump bag/pouch.
Connect the valve of the pump bag to the “IN” valve of your mattress.
Blow to about 10-20cm from the inlet of the pump bag, to inflate the main volume as much as possible.
Roll the bag on itself to the valve to push the air out of the main bag into your mattress.
Tips for sleeping well on your mattress
Once you are lying down, remember to adjust the inflation pressure of the mattress by slightly pressing the IN valve (open cap). A mattress that is too hard is often synonymous with discomfort.
Silicone patches on the top of the mattress are designed to reduce the sliding of your sleeping bag on the mattress.
Other patches on the underside reduce the slippage of the mattress on the floor of your tent.
How to repair a leaky mattress
An inflatable mattress is not puncture-proof, but it can be repaired!
When using it, take every care when installing and handling it.
In the event of a problem, we recommend using self-adhesive repair patches (ref: 8557113).
More care advice is available on the Decathlon Sport Advice website.
What is the R-Value?
The R-Value is a measure of the thermal insulation.
It measures the ability of a mattress to retain or prevent heat from escaping from a warm body (human body) to a cold floor.
The higher the R-Value, the better the insulation of the mattress.
It should be noted that R-Values add up; this means that you can use 2 mattresses and add up their R-Value.
All our mattresses are tested to standard ASTM F3340-18.
What R-Value for what use?
R-value from 0 to 1.9: Hot season (summer) only
R-value from 2 to 3: Use over 3 seasons (spring/summer/autumn)
R-Value from 3 to 6: Use over 4 seasons
R-Value > 6: Use in all 4 seasons and in extreme conditions (glacier, far north and high altitudes)
Volume and folded size
Folded dimensions Ø 12 cm x 30 cm.
Volume: 3 litres.
composition
composition
Main fabric: 50.0% Polyamide, 50.0% Polyurethane
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
To ensure that your product lasts for a long time and that it continues to work as it should, store it flat, valve open, in a dry, temperate place.
Restrictions on use
Maximum weight: 150 kg.<br /> Do not use in the water.
TESTS AND WARRANTY
Test product
All our mattresses undergo mechanical performance and resistance tests to guarantee you the best night's sleep and recovery (thermal and abrasion resistance, etc.). We also carry out several field tests in real-life conditions.
Warranty
2 Years
Agree by
This MT900 Air mattress has been validated in the field under real conditions. It was used for 5 weeks during the spring of 2021, by 2 teams of testers from outside Decathlon who trekked and bivouacked in the French Alps.
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
ProcessGreige
Product made from 50% undyed yarn
Using this finishing process enables us to reduce CO2 emissions linked to the production of undyed textiles by at least 53% compared to conventional dyeing.