Men's 3-in-1 Waterproof Travel Trekking Jacket Travel 100 0°C - Grey
Store Availability
Store Availability
BENEFITS
Ease of use
Hood rolls up inside the collar
Modularity
3-in-1: It adapts to every season thanks to the removable fleece.
Ecodesign
We only dye one thread in two to reduce the environmental impact
Robustness
Reinforced shoulders to withstand backpack rubbing
Warmth
comfortable down to 0°C. Removable inner fleece layer
Weight
This jacket weighs approximately 1.2 kg in size L
Waterproof
5000 mm H2O coating (Schmerbers). 2-hour shower. Fully taped seams.
Pockets
2 hand rest pockets + 1 inside chest pocket
TECHNICAL INFORMATIONS
Did you know that this TRAVEL 100 3-in-1 JACKET is eco-designed?
Our design choices reduce our CO02 emissions by 18% compared to the previous model thanks to these actions :
- The main material on this jacket is made from 100% recycled polyamide.
- The mesh inside of the jacket is made from 100% recycled polyester and uses mass dyeing known as "dope dyeing", that involves adding all the colour pigments when the yarn is manufactured to avoid dye baths.
- The lining on the sleeves and the fleece are made from 100% recycled polyester.
Focus on recycled polyester from bottles
By recycling plastic bottles and used textiles to produce our polyester, we reduce the use of petroleum resources while preserving the qualities and performance of the material for your outings.
The fleece uses a CO2 dyeing process in order to save water.
Durable thanks to good abrasion resistance...
We test our fabrics in the laboratory on various criteria, including abrasion resistance to reproduce the friction of backpack straps. We conduct a standardised Martindale test, which rubs the jacket’s fabric against another fabric. The aim is to measure the point at which the product starts to become worn & the pilling begins. The jacket passes the test easily as it reaches 20,000 cycles on the Martindale, above the average for other jackets on the market
... as well as provide good tear resistance.
The jacket was also subjected to single rip tearing tests. The aim is to reproduce in a laboratory the effect of your jacket snagging on something outdoors and being ripped.
Using this test protocol, we check that the fabric doesn't rip any further after a hole is made in the fabric, so that it can still protect you for years to come.
3-in-1 concept for adapting to every situation
With the "3-in-1" system, the jacket will be ideal for cold conditions (down to -0°C) and for hot weather trips, because you can leave the inner layer at home and wear the rain jacket by itself.
You can also wear the inner fleece on its own as a mid layer over a T-shirt.
With just one jacket, you therefore get 3 options!
WATERPROOFING OF THE COMPONENTS OF THIS JACKET
The waterproofing of a fabric by a coating or a membrane is measured in Schmerbers or H20 mm (pressure of a water column). The higher this number, the more waterproof the fabric.
WATERPROOFNESS OF THIS JACKET
A jacket's waterproof properties are not derived solely from its components: the technique used to assemble the different pieces is also an evaluation criterion.
Whether it's thermo-sealed or sewn and then taped, the overall waterproofness of your jacket is assessed in a shower test, developed by Decathlon, which simulates downpours of varying intensities.
We know, therefore, that this TRAVEL 100 waterproof jacket will protect you from a downpour i.e. 12 cm of rain in 2 hours.
composition
composition
Main fabric: 100.0% Polyamide; Lining: 100.0% Polyester; Hood fabric: 100.0% Polyamide; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
TESTS AND WARRANTY
Test product
This jacket was first tested in the laboratory, on a whole set of factors (warmth, waterproofing, durability). It was then tested by a small panel of users, at the heart of our global development centre, to assess the comfort, fit and practical features. Finally, it was validated in the field by volunteer-customers, as part of a test mission, just like a large number of Decathlon's products (check out our website)
Warranty
2 Years
Videos
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
MaterialRecycled polyester
Textile part made of 38% recycled polyester
We have incorporated recycled polyester into this product (instead of conventional polyester, which is itself derived from petrochemical plastic). What does this mean? In addition to being technical, this product has been designed taking into account its environmental impact: using recycled polyester means recovering and transforming products destined to be thrown away, such as production offcuts or plastic bottles, instead of using new oil resources.
-
Material
Recycled polyamide
Textile part made of 38% recycled polyamide
This product is made with recycled polyamide (instead of conventional polyamide). Objective: to use a recovered material, transformed from production scraps or products destined to be thrown away, rather than using new oil resources to reduce the environmental impact of this product. And this, without compromising the technical qualities!
-
ProcessBiton
8% of the fabric color is made by dyeing only one yarn out of two
Dyeing textiles requires the use of lots of water, whilst also generating water waste from dyeing vats. To reduce this environmental impact, we use just one dyed mass-coloured thread out of two out, subsequently reducing our consumption of water and our impact on it.