WARM BABY SKI SUIT - 500 WARM LUGIKLIP - BLUE
Store Availability
Store Availability
BENEFITS
Compatibility
System for attaching Decathlon Lugik baby mittens. Mittens not included.
Easy dressing
Opens fully at the front. Put the elastic of the gaiter over the boot.
Customisation
Space inside for writing your kid’s name.
Modularity
High collar covering back of neck Can be converted into hood with good coverage
Adjustable
Elasticated cuffs and hem to prevent snow from getting inside.
Warmth
150 g/sqm wadding. 140g/sqm fleece lining,fake fur in the back 220g/sqm.
Waterproof
Waterproof coating 5000mm H2O (Schmerbers) | Non-taped seams.
TECHNICAL INFORMATIONS
How can I be sure that my baby will be warm when sledging in the snow?
Our designers use wadding to keep the body warm. This polyester-based synthetic component traps more or less air depending on its thickness. The thicker the wadding, the more air it contains and the warmer it is.The baby snowsuit has 150 g/sqm wadding.
How can I be sure that my baby will stay dry when sledging in the snow?
The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A component with a waterproof rating of 2,000 mm can therefore withstand the pressure exerted by a 2,000 mm water column. A quality guarantee for this baby ski suit.
How do I make sure my baby doesn't lose their mittens and they always have warm, dry hands?
Use the Lugiklip system to attach Decathlon baby mittens onto the sleeves of their Decathlon baby ski suit and jacket.
In their quest for independence, your kid can attach the mittens on the sleeves on their own without going wrong thanks to the fun design of the Lugiklip accessories! Just combine the colours and animal heads will take shape.
The mittens will always be to hand, and the right hand!
The mittens are not included when buying the baby ski suit
How can I stop snow from getting in my après-ski?
Put the elastic at the bottom of the baby ski suit over the boot to prevent snow and draughts from getting inside the snow boot.
How to dress your babies so they stay warm on your sledging outings?
To make sure you stay warm and dry, we recommend using the 3-technical-layer rule:
- Layer 1 or thermal base layer to stay dry.
- Layer 2 or an insulating layer, to keep the heat in.
- Layer 3 against bad weather.
What is the water-repellent feature?
A water-repellent fabric lets water run off its surface, without absorbing it: the fabric does not soak up water and stays light and breathable. You can see drops of water beading and running off the surface of the fabric. A fabric is made water-repellent by applying a treatment to its outer surface. This treatment needs to be renewed during the lifetime of the garment (every 3 washes).
How to restore the water-repellent properties?
To reactivate the water-repellent property, wash the garment inside out on a synthetic cycle at 30°C and rinse thoroughly. You can use your usual washing powder but no fabric softener. Then leave your baby ski suit to air-dry completely on a drying rack. Finally, turn your garment the right way round and put it in the tumble dryer on low heat for 10 minutes. The heat will reactivate the water-repellent property of the fabric.
Where can I write my baby's name on this baby ski suit?
Space to write your kid’s name in order to personalise the product. Handy for finding their baby ski suit at the nursery.
Where can I store my baby's dummy on this baby ski suit?
A rip-tab chest pocket on the baby suit is specially designed to store their dummy.
How is the waterproof rating of the baby ski suit verified?
The waterproofing of a fabric by a coating or a membrane is measured in Schmerbers or H20 mm (pressure of a water column). The higher this number, the more waterproof the fabric.
This jacket is designed with a waterproof coating (JIS 1092 standard): this component resists 5,000 mm H20 (Schmerbers) before washing (equivalent to the pressure exerted by a 5 metre column of water).
composition
composition
Padding: 100.0% Polyester; Main fabric: 100.0% Polyester; Main lining: 100.0% Polyester; Secondary lining: 100.0% Polyester; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store on a hanger and do not fold as this could damage the fabric membrane. Dry thoroughly before storing in a dry and well-ventilated place.
TESTS AND WARRANTY
Test product
All the sledging products are tested under the real-life conditions for which they are designed: snow, cold and all the conditions you're likely to encounter when sledging. The design teams, product leaders, engineers and pattern makers ensure that the programme for which the product has been designed and developed corresponds perfectly to its use in the field.
Warranty
2 Years
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
MaterialRecycled polyester
Product made from 69% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
ProcessDope dyed
Product made from 4% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.