Kids’ Snowboard Jacket - SNB 100 JR - Black
Store Availability
Store Availability
BENEFITS
Ease of use
The hood has a rip-tab to keep it rolled up when not worn.
Customisation
Label for writing your child’s name.
Ecodesign
The environmental impact of the product has been reduced by 10% thanks to eco-design actions.
Adjustable
Cuff fastening. Adjustable snow skirt.
Robustness
Components resist abrasion.
Warmth
100g/sqm wadding. Brushed lining.
Waterproof
5000 mm-rated coating, main seams taped. Hood.
Limits snow entering
Simple wrist cuff, snowskirt.
TECHNICAL INFORMATIONS
Stops snow from getting inside - generally
This kids’ snowboard jacket (or kids’ ski jacket, that works too) is designed to stop snow getting inside:
_ on the back: snow skirt + longline cut,
_ at the cuffs (extremely exposed area): long sleeves + cuffs to protect the wrist,
_ the neck: collar with a high gusset / hood with velcro to keep it rolled in high position, to protect the neck under the helmet.
Stops snow from getting inside - focus on the very sensitive wrist area
This jacket has been developed and tested with the MI 500 JR PROTECT snowboard mittens which go under the jacket so that kids can easily pass the mittens through the sleeve on their own (from 8 years upwards - at 6 years old it's still complicated).Then there are a host of features to keep the snow out
1. jacket sleeve with thumb loop to prevent the sleeve riding up,
2. the mitten reaches high up the wrist
3. the jacket sleeve then covers everything.
Warmth
This jacket has 100 g/sqm filling with a brushed polyester lining for warmth.
WATERPROOFING
As well as the waterproof fabric, we enhance the waterproofing of our kids' snowboard jackets, or our kids’ ski jackets, with taped seams. These are heat-bonded waterproof strips placed on the seams inside the clothing to make it perfectly watertight. Only the main seams on the shoulders are taped on this SNB JKT 100 jacket.
4 pockets
This Decathlon kids’ snowboard jacket is designed for occasional snowboarding, nevertheless it has 4 pockets:
_ 2 side pockets secured with a zip fastening,
_ 1 secured inside pocket with a velcro fastening
_ 1 skipass pocket on the left sleeve secured with a velcro fastening.
Hood rolled under the helmet
When snowboarding, snow can get in the jacket during a fall. To limit this unpleasant experience, the collar and hood were designed together.
So that the hood can be used as a scarf and keep the snow out, fold the hood in 4 and velcro it so that it stays up and fills the gap under the helmet.
The collar should be closed normally, up to the top, to tighten the jacket.
Hood over the helmet
The hoods of the Snb JKT 100 jackets is not designed to be worn over the helmet.
This function is available on Snb JKT 500 jackets.
ADDITIONAL SUSTAINABLE DEVELOPMENT INFORMATION
By using
_ Recycled Polyester (outer fabric, wadding, inner lining / 59% of the jacket’s weight)
_ a mass pigmentation process (jacket cuffs and hem / 8% of the jacket's weight),
this Snb JKT 100 JR snowboard jacket (8573487 & 8590046) reduces the CO² equivalent environmental impact by 15% compared to last year's JR snowboard jackets (8494524).
ADDITIONAL RECYCLED POLYESTER INFORMATION
By recycling plastic bottles or recycled fabrics to produce our polyester, we reduce the use of petrol-based resources while maintaining the material's quality and performance in practice.
ADDITIONAL MASS PIGMENTATION INFORMATION
Textile dyeing requires a lot of water and also produces waste water from the dye baths.To reduce this environmental impact, we opted for a bulk dyeing process that involves adding the colour pigments when the yarn itself is being produced.
How should you dress your kids to ensure they don't get cold on the slopes?
To make sure you stay warm and dry, we recommend using the 3-technical-layer rule:
- Layer 1 or a second skin, to stay dry.
- Layer 2 or an insulating layer, to keep the heat in.
- Layer 3 or a protective layer to protect against the elements.
How can I be sure that my jacket is strong and durable?
We guarantee our products for 5 years and will repair them with the help of local professionals if you should accidentally damage them. Contact us on our website to find out more about what you need to do to get your product repaired.
We take particular care in choosing all the elements and assemblies that make up our products, so that they are as durable as possible for snowboarding use.
Water often gets in through the seams. Does my jacket have taped seams?
In addition to the waterproof fabric, we reinforce the waterproofing of the jacket with taped seams. These are heat-bonded waterproof strips placed on the seams inside the clothing to make it perfectly watertight. On this product, these waterproof seams are used in the areas the most exposed to the snow (hoods, shoulders).
What is the water repellent feature of my jacket for?
The water-repellent feature makes water run off the fabric without seeping in thanks to a treatment applied to its outer surface. The fabric does not soak up water and stays light and warm. This treatment must be renewed during the life of the product, after 2 to 3 washes on average, using the products available in our stores. All the waterproof jackets that we design for snowboarders are water repellent.
How will my jacket keep me warm?
To keep the kids warm, we use wadding insulation. Wadding is a synthetic component made from polyester which stores more or less air, depending on the length of the fibres. Wadding can be standard, hi-tech or silicone-coated, each with different properties (warmth, low weight, elasticity, etc.)We use 100% recycled wadding to reduce the environmental impact of the product.
How to wash the jacket?
To optimise your jacket's performance and durability, we advise the following:
* Machine wash at 30°, synthetic programme.
* Turn the product inside out.
* Add a small amount of detergent. No softener.
* We recommend you wring it by hand.
* Dry on a hanger in a warm, well-ventilated place.
Do not dry clean. Do not place on a radiator.You can restore the water resistance of the outer fabric using a fabric waterproofing spray. Read the care label.
How do I look after my product?
To optimise the performance and durability of your product, we recommend: Machine wash separately at 30°C. Synthetic cycle. Turn the product inside out. Use a small amount of detergent. No softener.
Wring by hand. Dry on a hanger in a warm, well-ventilated place. Do not dry clean. Do not place on a radiator.You can restore the water resistance of the outer fabric using a fabric waterproofing spray.
Repairs
This product is repairable. We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store.
However, if we can't repair your product (production defect), we will exchange it or reimburse you.
How does my product warranty work?
This product is guaranteed for 5 years from the date shown on the sales receipt. A product covered by warranty will be repaired or exchanged free of charge. The warranty covers product defects , excluding those resulting from normal wear and tear and improper use.
Find all the warranty details here: https://www.wedze.fr/quest-ce-que-la-garantie-textile-5-ans
composition
composition
Main fabric: 100.0% Polyester; Padding: 100.0% Polyester; Lining: 100.0% Polyester; Cuff: 20.0% Elastane, 80.0% Polyamide; Rib fabric: 3.0% Elastane, 97.0% Polyester; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASH TEMPERATURE OF 30°C. VERY MODERATE TREATMENT.
MAXIMUM WASH TEMPERATURE 70°C. NORMAL TREATMENT.
DO NOT TUMBLE DRY.
IRONING AT A MAXIMUM IRON SOLEPLATE TEMPERATURE OF 200°C.
PROFESSIONAL DRY CLEANING WITH TETRACHLOROETHYLENE AND ALL SOLVENTS LISTED OPPOSITE THE F SYMBOL. NORMAL TREATMENT.
Storage tips
Store on a hanger and do not fold, as this can damage the fabric coating. Dry thoroughly before storing in a dry and well-ventilated place.
TESTS AND WARRANTY
Test product
All the Dreamscape snowboard products are tested in the real-life conditions of use for which they were designed: in the snow, cold and all the conditions encountered when snowboarding and skiing. Our design teams, product managers, engineers and pattern makers make sure that the programme for which the product is designed perfectly matches its use in the field.
Warranty
5 Years