Remote gas stove with lighter - MT500
Store Availability
Store Availability
BENEFITS
Autonomy
182 g/hour or 1 hour 15 mins with a 230 g screw cartridge
Compatibility
Butane/propane screw cartridges compliant with standard EN417
Ease of use
Weight 170 g Built-in piezo. Compact folding. Carry case provided
Power
2500 watts. Boiling time for 1 litre of water: 3 mins 23
Stability
Separate cartridge that lowers the stove’s centre of gravity. Improved safety
Wind resistance
Built-in wind guard on the burner
TECHNICAL INFORMATIONS
Safety
This stove meets standard EN521.
It must be used only with butane/propane cartridges compliant with standard EN417.
Decathlon Forclaz cartridges (100 g, 230 g, 450 g) comply with standard EN417 and are compatible with the Decathlon - Forclaz MT100, MT500 and MT500 remote stoves.
Read the instructions and precautions for use attached to the stove.
Setting up the stove and connecting a gas cartridge:
To set up a gas cartridge, always do so in a ventilated place, preferably outdoors and never near a flame, heat source, spark, individuals or flammable materials.
Check that your stove's gas inlet is properly closed and check the location and condition of the leakproof seal.
Make sure that the cartridge is on a stable flat surface. Do not shake.
Setting up the stove and connecting a gas cartridge (continued):
Hold the device and screw in the cartridge by hand by turning it clockwise until it stops, being careful not to damage the screw thread.
Follow the same instructions to take off the cartridge.
It can be dangerous to use cartridges other than Decathlon - Forclaz.
It's normal to hear a small fizzing sound (escaping gas) for less than 2 seconds when connecting the cartridge to the stove.
Weight and dimensions
Stove weight: 170 g
Bag weight: 15 g
Dimensions: Ø 18 x h 11 cm. Folded size: l 11 x h 11 cm.
The weight, volumes & sizes may vary slightly owing to production tolerances.
Ease of use
Pot stand on 3 legs, perfectly adapted to Forclaz Trek 500 stainless steel pans (Ø 13.5 cm).
Flexible metal hose 31 cm long for easy remote positioning of the cartridge and simple ignition.
Installation: Place the stove on a flat, unobstructed surface. Screw the end of the cable onto the cartridge and install it connected away from the stove. Open the flow control valve, operate the piezo (several times if necessary). Your stove is lit.
Heating time
Our internal tests give us values that reflect the actual conditions of use. In fact, we tested our stoves with Trek 500 stainless steel pans, filled with a litre of water.
Score: boiling time for 1 L of water: 3 mins 23. Actual power: 2500 watts. Actual consumption: 181 g/hour.
The results and performance of different stoves must be analysed in a comparable way (same conditions and parameters).
Heating time (continued)
The heating time of a stove is subject to a mandatory standardised process for EU certification but does not necessarily reflect the actual conditions of use.
Standard EN521 parameters (heating rate):
Propane gas at 3 bar pressure, without container.
Results: 4.1 kW / 292.5 g/hour
Performance and consumption
Many parameters affect the capacity and performance of your stove: atmospheric pressure, wind, damp, etc. and can therefore change the boiling temperature, heating time as well as the number of litres heated with one cartridge.
We strongly recommend using a windshield to optimise gas consumption.
The performance of a stove is therefore assessed according to the gas consumed / heating speed.
composition
composition
Main part: 100.0% Stainless Steel; Carry bag: 100.0% Polyethylene; Complementary parts: 100.0% Polypropylene
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Avoid contact with moisture. Do not leave in the rain.<br /> After use or cleaning, store your stove in a dry place taking care to unscrew the cartridge.
Restrictions on use
Only use outside. Cartridge sold separately.
TESTS AND WARRANTY
Warranty
10 Years
Agree by
This stove has been tested and validated in the field in real-life conditions. It was used for 5 weeks by several people who spent 2 weeks trekking in the Canary Islands, followed by 3 weeks on the GR10 trails in the Pyrenees, then another 4 weeks in Scotland by another team of testers.