WILDER DOUBLE-STANDARD BLACK CROSS-COUNTRY SKIING HELMET
Store Availability
Store Availability
BENEFITS
Compatibility
Wedze helmets and masks are designed to form an integrated whole.
Easy maintenance
Liner hat that is removable and machine washable at 30°C.
Modularity
The liner hat of our helmet is easily removable
Weight
Weight of helmet WITH hat = 400 g (M) Weight of helmet WITHOUT hat = 360 g (M)
Stability
Head size adjustment wheel
Impact protection
Double standard helmet: ski + mountaineering - climbing
Ventilation
the different air inlets are positioned to aerate the head as much as possible
Instructions
DownloadTECHNICAL INFORMATIONS
Dual standard: SKI/MOUNTAINEERING and CLIMBING Helmet tested and approved according to 2 standards
The CE EN 1077 class B standard is a European standard that applies to helmets used for protecting the head when downhill skiing or snowboarding. This standard tests the ability of the helmet to absorb shocks from the side and withstand penetration.
The CE EN 12492 standard is equivalent to the standard applicable to ski helmets for vertical sports, including mountaineering and climbing. Protection of the skull against vertical impacts.
Weight
Lower than the average weight for Wedze ski helmets
-Size M: 400g with the liner hat
-Size L: 430g with the liner hat
-Liner hat weight 15g
Sizes
- Size M: head size from 55 to 59 cm
- Size L: head size from 59 to 62 cm
Removable liner hat
We designed this helmet with a liner hat to keep you warmer during your ski touring outings.
If you feel hot on the way up, it's easy to remove the helmet liner hat. Then, for the descent, you can put the liner hat back inside and it is held in place with rip-tabs.
Adjustment knob: TURNRING SYSTEM
The Turnring is essential to the support of your helmet. This system can be easily and precisely adjusted at any time using the easily accessible dial that you can even use with your skiing gloves. It also gives you comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.
Construction: in-Mold
Thanks to the in-Mold Construction, the helmet is lightweight. This technique forms an external shell that is directly moulded on the internal EPS shell.
It absorbs shocks in the event of any impact.
The light grey hard shell, which encloses the helmet, is made of polycarbonate and increases impact protection.
An intermediate layer (yellow) is added to the construction of the helmet to protect you from the risk of perforation (branches, stones)
Compatibility
Using the two plastic hooks on each side of the helmet, you can slide the elastic from your headpiece.
The shape of the helmet has been designed to perfectly match the WEDZE goggles
RECCO system®:
If you use your helmet in a resort
The RECCO® search and rescue system features a technology in two parts which is used by the rescue services of most ski resorts.
- The RECCO® detector used by the rescue teams emits a directional signal.
- The RECCO® reflector built into the jacket returns the signal.
This generates an audible sound which guides rescue personnel directly to the person needing assistance.
Before setting off, make sure you get the information you need from the professionals
Tip: Product lifetime
Replace your touring ski helmet at least every 5 years if it hasn’t suffered a significant shock in the meantime.
composition
composition
Foam core: 100.0% Polystyrene; Shell: 100.0% Polycarbonate; Webbing: 100.0% Polypropylene
Tips for storage and maintenance
Storage tips
Do not store: in a damp place, near to a source of heat or UV rays. <br /> Preferably store it after drying it thoroughly
TESTS AND WARRANTY
Test product
This helmet was tested by the design team during the winter of 2020-2021 during numerous ski touring outings.
Warranty
2 Years
Agree by
All our helmets are approved by a certified and independent laboratory.