What are the components that make my trousers warm?
To make these trousers 100% stretch, we also used stretch wadding that doesn't tear. (60 g/m²). Wadding that tears will create a "cold bridge" in that area.
What is a membrane and what's it for?
The membrane is a very thin component applied to the inner surface of the outer fabric. This hydrophilic component prevents water from seeping in while wicking away the perspiration produced by the body. The membrane is unbeatable when it comes to staying warm and dry.
How is the waterproofness of your trousers measured?
The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A fabric with a waterproof rating of 12,000mm is therefore resistant to the pressure exerted by a 12,000mm column of water.
How can I be sure my trousers will give me proper protection in bad weather?
These trousers have been developed using a robust component and rigorous assembly that limit wind chill and prevent the passage of water to help you brave all weather (rain, snow, wind, etc). To check their water-resistance, the trousers were placed under a special shower, to reproduce the conditions faced by a skier. We have checked the waterproofness of this product in use in various weather conditions over several days.
Why are my trousers water repellent?
The water-repellent property of a fabric is its capacity to allow water to run off its surface without seeping in. These trousers feature water-repellent components to improve their resistance to bad weather. The fabric is made water-repellent by treating its outer surface. However, this property may deteriorate with use.
How can you restore the water-repellency of your trousers?
Bear in mind that the water repellent feature can be reactivated. To do this, put the trousers in the tumble dryer on a synthetics programme for 10 to 15 minutes.
You can also use a waterproofing spray (sold in our stores): spray the product evenly over the entire garment, then leave it to dry for 10 to 12 hours).
What are "breathable" trousers?
This garment wicks away the water vapour produced by your body when exercising. To see if a fabric is breathable, its resistance to evaporative heat (RET) is measured in a standardised ISO 11092 test. The lower the RET, the more breathable the fabric. The 980 trousers have a RET of 8. However, it is the technical solutions (zips, vents, mesh) that Wedze uses, which reduce the condensation inside the garment and maximise breathability.
How should I dress to avoid having cold legs on the slopes?
To keep your legs warm and dry, 2 layers of clothing are enough: - 1 ski base layer to wick away perspiration.
- 1 ski trouser to protect against bad weather and provide warmth.
How can I prevent snow from getting into my trousers?
The trousers have elasticated gaiters at the ankles to cover the boots. If you fall or come into contact with fresh snow, the seal created by the gaiter keeps the snow out.
What is the cut of the 980 trousers?
Slim fit with an internal volume that allows these trousers to be combined with a technical base layer.
How should you wash your trousers?
To optimise the performance and durability of your trousers, we recommend:
* Machine wash at 30°, synthetic programme.
* Turn the product inside out.
* Add a small amount of detergent. No softener.
* We recommend you wring it by hand.
* Dry on a hanger in a warm, well-ventilated place.
Do not dry clean. Do not place on a radiator.
This product is repairable
This product is repairable. We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store. However, if we can't repair your product (production defect), we will exchange it or reimburse you.