Inflatable 2 person touring Kayak High Pressure Bottom - X100+
Store Availability
Store Availability
BENEFITS
Easy assembly / dismantling
Inflates in 8 minutes with a dual action hand pump.
Glide performance
The bow shape gives the kayak good glide performance. 3 keels.
Quick drying
Its tarpaulin construction allows faster drying.
Robustness
Dropstitch floor. Tarpaulin side tubes with pressure relief valves.
Capacity
For 1 to 2 people, up to a maximum of 195 kg (430 lbs).
Sitting comfort
Raised seat for comfort when at rest and when paddling.
Stability
Side tubes and a wide inflatable floor for good stability.
Repair
Spare parts available online or at you nearest Decathlon workshop.
Instructions
DownloadTECHNICAL INFORMATIONS
Technical dimensions and weight.
INFLATED SIZE
Length: 365 cm
Width: 103 cm
FOLDED & BAGGED SIZE
Height: 67 cm
Width: 40 cm
Thickness: 30 cm
Weight: 16 kg
Maximum floor pressure: 0.34 bar (5 psi)
Side tube and seat pressure: 0.2 bar (3 psi)
Number of seats: 1 or 2 seats
Content: kayak, bag, repair kit, 3 fins, user guide, inflation connector, strap.
PUMP NOT INCLUDED
For use with an Itiwit double-action hand pump with adapters
Inflation tips and floor positioning
Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the floor to 5 psi. Finish by screwing the cap back on.
Put the floor inside the kayak and strap it at the ends. The floor valve must be aligned with the side tube valves located at the back of the kayak. The floor's position must allow free access to the drain plugs located in the middle of the kayak.
Side tube and seat inflation tips
Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the side tubes to 3 psi. Finish by screwing the cap back on. Each side tube has a pressure relief valve. Its purpose is to evacuate excess air resulting from overinflation. When this happens, you may notice a hissing sound. This hissing sound is normal, it can also occur during prolonged exposure to the sun. It will stop once the kayak reaches the correct internal pressure.
Seat comfort and positioning.
The seats are high, providing increased comfort for adults in the paddling position.
Position the seats on the floor using the rip-tab areas located under the seat and on the floor.
Stow any bags or equipment into the kayak's rear hatch or attach to the rear deck.
The boat is ready to be launched.
Glide performance
The deck of the Itiwit 100+ is based on the same dropstitch construction as the inflatable stand up paddle. Dropstitch is a mesh made of polyester yarns between 2 layers of PVC. When the floor is inflated under high pressure, the threads are stretched and the construction becomes very strong, thus avoiding any deformation.
Care instructions
Remove the seats and slightly deflate the floor to make it easier to rinse out.
Rinse the kayak, floor and seats with clean water after each use to avoid damage from sand, salt water and sun.
Open the drain plugs located in the middle of the kayak and at the rear. Tip the kayak to empty out the water.
Disassembly & folding
Make sure that the surface you intend to fold the kayak on is clean. Remove the fins.
Deflate the side bladders. The valves are located at the back of the kayak. PLEASE NOTE: Do not unscrew the pressure relief valves at the front.
Fold the floor.
Fold the rest of the kayak in half lengthwise. Flatten the front fin base.
Lay the rolled floor on the front end. Roll the kayak to the rear end.
Strap the kayak.
Storage
Once dry and clean, the kayak should be stored in a dry and shady place, protected from significant temperature changes.
The kayak can be stored folded but if you have enough space, storing it flat and slightly inflated will extend its life.
After-sales service
Spare parts are available for Itiwit X100+ kayaks from after-sales service. Visit the workshop at your nearest Decathlon store to collect or order some.
Drop Stitch floor: 8561068
Pressure relief valve: 8561069
Carry bag: 8561073
Paddle rip-tab: 8561070
Directions for use.
We recommend that you use the product with a buoyancy life vest.
Less than 3.50 metre canoe-kayak rules
Is your canoe-kayak inflatable or rigid and is less than 3.50 metres? You have what is called a beach craft.
You must always stay 300 metres from a shelter (any place on the coast where any boat or vessel and its crew can get to safety by anchoring or berthing and leave without assistance).
Buoyancy aids are not mandatory but strongly recommended to make it easier to get back in the boat if you fall out.
More than 3.50 metre canoe-kayak rules
Your canoe-kayak is rigid or inflatable with at least 2 separate air chambers. It measures more than 3.50 metres. It is "sea approved" by the manufacturer.
You can paddle up to 2 nautical miles (approx. 3 km) from shore. You will need a number of safety features.
You can find these elements using this link: https://www.itiwit.fr/reglementation-pour-faire-du-canoe-kayak
composition
composition
Floor mat: 20.0% Polyvinyl Chloride, 80.0% Polyester; Bladder: 20.0% Polyvinyl Chloride, 80.0% Polyester
Tips for storage and maintenance
Storage tips
Once dry and clean, the kayak should be stored in a dry and shady place, protected from significant temperature changes.
TESTS AND WARRANTY
Agree by
ISO 6185-1 standard. Category IIIB (beach craft) Complies with French Division 240 regulations (sailing up to 300 m from shelter)
Parts guarantee
Guaranteed availability of spare parts essential to use of product: 2 years Availability: 10 years