Dome Trekking Tent - 3 person - MT900
Store Availability
Store Availability
BENEFITS
Easy assembly / dismantling
Dome structure (double Y). Separate flysheet and bedroom. One sole pole.
Easy transport
Total weight 2.7 kg Compact & compressible bag 9.2 L Dimensions 39 x 16 x 15 cm
Capacity
60 cm width per person Bedroom height 119 m 2 doors. 3 porches. 6 pockets
Waterproof
Water column (Schmerber): Flysheet > 2,000 mm Bedroom groundsheet > 3,000 mm
Repair
Inner bedroom, flysheet and pole section available as spare parts
Wind resistance
Resists 65 km/h winds (force 8): validated in wind tunnels on rotating plate.
Airing
Flysheet. Doors with mosquito nets. 2 large top ventilation areas.
TECHNICAL INFORMATIONS
Durability
Your tent is designed for itinerant bivouacking, it is therefore not designed for static use in the sun.
We recommend that you avoid leaving it in the sun as the ultra-light fabrics can be sensitive to UV light, that damages them.
Seasons
3-season tent: your tent will protect you from the harsh weather conditions you can encounter in the spring, summer or autumn. It will withstand light snowfall but is not designed to withstand heavy loads that would weigh on the structure.
In case of snow, remember to shake your tent regularly in order to bring down any snow that has accumulated to avoid putting too much weight on the structure of your tent.
Repairs and After-sales service
As designers, we care about the durability of our products, which is why all our tents are designed to be repairable.
You will find the detachable parts (poles, bedroom, etc.) in store or in the workshop of your local Decathlon, or on the website.
If you have a problem, don't hesitate to have your tent looked at in your local Decathlon store.
Repair kit (ferrule, patch): 20 g
Size and living space
Bedroom length 205 cm
Bedroom width 185 cm to the head & 155 cm to the feet.
Bedroom height 119 cm
Total height 130 cm
3 porches (side and front) are around 70 cm wide and protected by a built-in sheet which shelters your equipment from the sun and bad weather. There is storage space for 3 backpacks up to around 70 litres.
6 pockets (4 side & 2 top) to keep and organise your belongings.
Rope loops.
Architecture, tent poles and tent pegs
Lightweight, shock and frost resistant aluminium pole: 7001 T6 Yunan SD70PF Ø 9.5 mm aluminium.
Optimised square tent pegs: “anvil” head, oversized main part, extremely resistant and lightweight (7075 T6 aluminium).
Dome double Y shape: the main pole splits into 4 feet on each corner for a self-standing structure. Top pole provides volume and therefore capacity.
Weight
Total weight 2.7 kg
Separable parts to help transportation.
Flysheet 708 g
Bedroom 950 g
Pole kit 705 g
Pegs (15 pieces) 150 g
Guy ropes (7 pieces) 25 g
Bags 66 g + 15 g
Repair kit (ferrule) 20 g
To protect your product and increase your protection from the sun and bad weather, you can complement your MT900 3P tent with the groundsheet with reference: 8797787 (360 g).
Weight, volume and dimensions can vary slightly due to manufacturing tolerances.
Wind resistance
We test all our tents in a wind tunnel on a turntable where we can expose each side of the tent to the wind.
To test its wind resistance, the tent must be properly pitched, taut but not stretched, with all the guy ropes in position around the tent. It should remain habitable at wind speeds of 65km/h, measured near ground level.
Our tents are certified by the CSTB independent laboratory in Nantes.
Ventilation and condensation prevention
Bedroom with mosquito screen for ventilation and water-repellent fabric to protect from condensation and draughts. There are 2 large top ventilation areas that you can close using a Velcro strip.
To reduce condensation inside your tent, it must be properly pitched, with the fabric kept taut without being over-stretched. Two-way zips on the doors to keep them open. The use of ventilation and good air circulation limits humidity inside your tent
Pitching/striking
Separate flysheet and bedroom. Traditional pitching method: bedroom on the ground and clipped to the poles. Cover the whole tent with the flysheet. Adjust the tautness.
If needed, the bedroom can be dismantled from inside.
Intuitive pitching thanks to colour coding on the pole, bedroom and flysheet.
When it rains, to pitch the flysheet first, you will need the compatible groundsheet (ref 8545730).
Waterproofing
Forclaz tents are laboratory-tested: pitched tent, 200 litres/sqm/hour (3 hours, equivalent to a tropical storm). They are also tested in the field by a sample user group.
20 denier polyester (PES) flysheet and 40D polyamide (PA) groundsheet have a polyurethane coating (inside) and silicone (exterior).
Seams taped with heat-sealed strips.
Multi-component bedroom combining breathability, wind protection and prevents condensation
composition
composition
Inside room: 65.0% Polyamide, 35.0% Polyester; Main fabric: 20.0% Thermoplastic Polyurethane, 80.0% Polyester; Pole: 100.0% Aluminium
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
after using or cleaning the tent, dry it thoroughly before storing to avoid bad odours and mould.
Restrictions on use
For more comfort, use a mummy-shaped mattress.
TESTS AND WARRANTY
Agree by
This tent has been tested and validated in the field in real-life conditions. It was used for 5 weeks by several people who went trekking in the Canary Islands for 2 weeks, followed by 3 weeks on the GR10 route in the Pyrenees. It has also been tested on Canadian trails by 2 of our partners.
Parts guarantee
5 years. All our tents are repairable. Parts and information in store or on our website