Scuba diving console with 300 bar pressure gauge and depth gauge
Store Availability
Store Availability
BENEFITS
Easy reading
Luminescent dials. Graduations up to 300 bars and 60 m.
Robustness
Explosion-proof, shock-proof.
Instructions
DownloadTECHNICAL INFORMATIONS
Technical features
Pressure gauge with stainless one-piece chrome-plated brass housing – Explosion-proof, shockproof.
Copper-beryllium sensitive spiral element.
Hose with an outer diameter of 55 mm.
Male screw thread. 7/16'' HP.
Red zone between 50 bar and 0 bar on the pressure gauge and beyond 50m for greater clarity.
Highlighting of the safety limits.
Extra ring on the side to attach the pressure gauge and keep it within reach thanks to the safety strap.
Tips on assembly
To not overtighten the first stage. First stages are usually made of chrome-plated brass, a soft alloy. Overtightening can damage the first stage. The O-ring on the hose is used for watertightening purposes. Use a silicone grease to lubricate the seals and increase their lifespan.
Servicing the regulators
SUBEA advises you to service your regulator every two years and to make a visual inspection at least once a year. These two inspections must be made in a SUBEA certified workshop. A service is also recommended after a particularly intensive season (more than 100 dives), or after a long period of inactivity.
Please visit our website.
Storage instructions
It is important to store all diving equipment well clear of sources that produce ozone (electric motors, cookers, etc.) and to protect it against UV rays. If this is not the case, the seals can deteriorate more quickly, affecting your safety or the working order of the regulator. Keep your equipment in a dry place away from heat and direct sunlight.
composition
composition
Yoke: 100.0% Aramid; Chassis: 100.0% Steel
Tips for storage and maintenance
Storage tips
It is important to store diving equipment away from sources<br /> that produce ozone. Keep your equipment in a dry place away from heat and direct sunlight.
Restrictions on use
Diving requires the certification/supervision of an instructor.
TESTS AND WARRANTY
Test product
Designed and tested by our teams and our technical partner in Hendaye (France).
Warranty
2 Years
Agree by
Our technical partner: Planet Ocean (the PADI 5-star diving centre) based at the WaterSports Centre by DECATHLON in Hendaye - France. The centre uses SUBEA diving equipment throughout the year. The team of instructors are rigorously involved in the development of our SUBEA products: from the design phase with the teams (product managers, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).