Inflatable Trekking Mattress - MT500 air XL - 195 x 60 cm - 1 person
Store Availability
Store Availability
BENEFITS
Easy assembly / dismantling
Inflate by mouth. Dual valve with non-return system (IN valve).
Easy transport
Total weight 600 g (mattress only 585 g. Volume: 2.4 litres
Thermal insulation
R-Value: 1,5. Mattress ideal for temperatures > 8 °C. (ASTM F3340-18 standard)
Sleeping quality
Dimensions 195 cm x 60 cm x 5 cm. Adjustable pressure by pressing the IN valve
Traction
Anti-slip silicon pads. Limits the sleeping bag from sliding
TECHNICAL INFORMATIONS
How to choose the size of your MT500 mattress
This model is available in L and XL version.
The difference between the 2 sizes on the length (180 cm for the L; 195 Cm for the XL) and width (52 cm for size L; 60 cm for the XL).
To choose the mattress that best suits you, you must consider your stature, but not just that.
Your preference and/or your preference for space around your shoulders should also be considered.
So, even if you are 1.75 cm, you will prefer the XL!
Tips for sleeping well on your mattress
Once you are lying down, remember to adjust the inflation pressure of the mattress by slightly pressing the IN valve (open cap). A mattress that is too hard is often synonymous with discomfort.
Silicone patches on the top of the mattress are designed to reduce the sliding of your sleeping bag on the mattress.
How to easily fold the MT500 Air mattress?
The easiest way to fold your mattress without damaging it is to fold it in four lengthwise, then roll it up.
How to repair a leak on your MT500 Air mattress?
An inflatable mattress is not puncture-proof but it can be repaired!
When using it, take every care when installing and handling it.
In the event of a problem, we recommend using self-adhesive repair patches (ref: 8557113).
For more information, copy the following link into your browser:
https://www.forclaz.co.uk
What is the R-Value?
The R-Value is a measure of the thermal insulation. It measures the ability of a mattress to retain or prevent heat from escaping from a warm body (human body) to a cold floor.
The higher the R-Value, the better the insulation of the mattress.
Please note that the R-Values can be added; this means that you can use two mattresses and add their R-Values.
All our mattresses are tested to standard ASTM F3340-18.
What R-Value for what use?
R-value from 0 to 1.9: Hot season (summer) only
R-value from 2 to 3: Use over 3 seasons (spring/summer/autumn)
R-Value from 3 to 6: Use over 4 seasons
R-Value > 6: Use in all 4 seasons and in extreme conditions (glacier, far north and high altitudes)
Volume and folded size
Folded dimensions Ø 10.5 cm x 28 cm.
Volume: 2.4 litres.
Weights, volumes & dimensions may vary slightly due to production tolerances.
composition
composition
Main fabric: 57.0% Thermoplastic Polyurethane, 43.0% Polyester; Carry bag: 100.0% Polyester
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
In order to improve the durability and reliability of your product, store it laid out flat with the valve open in a dry place away from extreme temperatures.
Restrictions on use
Maximum weight: 150 kgs.<br /> Do not use in the water.
TESTS AND WARRANTY
Test product
All our mattresses undergo mechanical performance and resistance tests to guarantee you the best night's sleep and recovery (thermal and abrasion resistance, etc.). We also carry out several field tests in real-life conditions.
Warranty
2 Years
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
ProcessDope dyed
Product made from 100% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
Environmental ImpactDesigned to reduce environmental impact
Product made with a CO2eq reduction of 11% compared to the previous or similar product
Our design teams are working to develop processes that will reduce the impact of a product, while preserving its technical characteristics. This reduction relates to the following indicators: climate change, air pollution, water pollution and resource depletion.