FLEXIBLE CAMPING COOL BOX - 20L - 9 HOURS OF COOL STORAGE
Store Availability
Store Availability
BENEFITS
Compact design
Folds and stores easily to take up less space in your car
Ease of use
Wide zipped opening | One storage pocket on the outside
Isothermal
Keeps food fresh for 9 hours without ice packs | Standard: EN 12546-2
Weight
Lightweight: 782g
Carrying comfort
Adjustable shoulder strap and foam patch for shoulder relief
TECHNICAL INFORMATIONS
Capacity
20 litres. Recommended for 2-4 people.
There is a stretchy mesh storage pocket on the outside.
Dimensions
When unfolded, the cooler's dimensions are:
Height: 38 cm | Length: 34 cm | Width: 31 cm
Internal dimensions:
Height : 34 cm | Length: 30 cm | Width: 28 cm
When folded, the cooler becomes more compact and has the following dimensions:
Height : 18 cm | Length: 32 cm | Width: 30 cm
WATERPROOFING
This ice box is not waterproof.
It’s normal for moisture or water inside the cooler (through condensation, for example) to seep through seams. This prevents humidity or unwanted water from being stored inside the cooler.
Directions for use
Using tests, conducted according to the EN 12546-2 standard, we measured the cooler's capacity to keep food cool for 13 hours with ice packs (1.2 kg).
To improve the thermal properties of your cooler, we recommend:
- using cold packs,
- leaving your cooler in the shade,
- only opening it when necessary and quickly closing it.
Robustness
We have used reinforced 600 denier* polyester fabric (PES) for the bottom of the cooler to increase the product's robustness outdoors and in the mountains.
*Denier tells you the weight of a yarn in grams per unit length of 9 metres; so, for a 600-denier fabric, this means it weighs 600 grams for 9 metres.
FOLDING
By folding, you can reduce the volume of the cooler to save space when storing it. Here are our tips for correct folding:
- close the zip of your cooler,
- press the top down to compress it as much as possible,
- secure by putting the elastic, located on the side, around the cooler to keep it as flat as possible.
composition
composition
Foam: 100.0% Polyurethane; Back fabric: 15.0% Polyurethane, 85.0% Polyester; Lining: 15.0% Polyurethane, 85.0% Polyester; Pad: 100.0% Polyethylene
Tips for storage and maintenance
HAND WASH. MAXIMUM TEMPERATURE OF 40°C.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
We recommend you choose a clean, dry area. It’s best to wash and dry your cooler before storing it away.
Restrictions on use
Not waterproof. <br /> Do not load your cooler above 8 kg.
TESTS AND WARRANTY
Test product
The European standard EN 12546-2 certifies the performance of the cool bag without ice packs. To obtain this standard, tests are carried out by an external laboratory. These tests consist of placing water at a temperature of 5°C into the cooler, which itself is placed in an world of 32°C. The point is to then measure the time the water takes to reach a temperature of 15°C. The measured time for this cooler was 9 hours.
Warranty
2 Years
Agree by
To fulfil your needs, the Quechua products are tested in the countryside under the conditions that you will come across when camping. Our teams, as well as a tester panel (made up of partners, ambassadors and customers), test products throughout their development until they go to market.
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
ProcessDope dyed
Product made from 74% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.
-
ProcessGreige
Product made from 26% undyed yarn
Using this finishing process enables us to reduce CO2 emissions linked to the production of undyed textiles by at least 53% compared to conventional dyeing.