Men's Waterproof Sailing Overtrousers 100 Eco-designed navy
Store Availability
Store Availability
BENEFITS
Anatomic design
Flat waistband for extra comfort, elasticated to keep it in place
Compact design
These overtrousers easily pack down into a pocket
Easy dressing
Adjustable trouser hem: can be put on while wearing shoes
Waterproof
Tested in moderate rain over 2 hrs 16,000 mm Schmerber Pockets not waterproof
Pockets
1 secure pocket
Breathability
Very breathable coating (RET<12)
TECHNICAL INFORMATIONS
WATERPROOF PROPERTIES
We measure the resistance of a fabric to water pressure expressed in mm of water column (based on the ISO 811 standard). The higher the water pressure withstood by the fabric, the more waterproof it is.
Here are the waterproofing ratings:
Component resistant to water pressure of 2000 mm before and after ageing (5 washes). This equates to 15 000 Schmerber - average pressure exerted by the water during rain.
The trousers' waterproofing has been tested in a rain shower with 60 litres of water/m²/hour for 2 hours
OVERTROUSERS CARE INSTRUCTIONS
- Rinse with clean water after use
- Store in a dry place
- To protect the water-repellent treatment, wash as little as possible
- Wash the product inside out and fastened. 30°C or 40°C synthetic cycle with regular detergent. Do not use fabric conditi1r. Do not overload your machine. Extra rinse cycle.
- Line dry.
- To reactivate the water repellency, tumble dry inside out on a synthetic cycle for 10 to 15 minutes.
BREATHABILITY OF THE OVERTROUSERS
COMPONENT BREATHABILITY
To find out if a fabric is breathable, its coefficient of Thermal Evaporative Resistance (RET) is measured during a test based on the ISO 11092 standard. The lower the resistance, the more the fabric allows the water vapour generated by the body during exercise to escape and the more breathable it is.
- RET < 9 = extremely breathable fabric
- 9 < RET < 12 = very breathable fabric
- 12 < RET < 20 = breathable fabric
- RET > 20 = not very or not breathable fabric
composition
composition
Main fabric: 100.0% Polyamide; Yoke: 100.0% Polyamide; Coating: 100.0% Polyurethane
Tips for storage and maintenance
MAXIMUM WASHING TEMPERATURE 30°C. NORMAL TREATMENT.
BLEACHING EXCLUDED.
DRYING IN TUMBLE DRYER POSSIBLE. LOW TEMPERATURE, MAXIMUM DRUM EXHAUST TEMPERATURE 60°C.
DO NOT IRON.
DO NOT DRY CLEAN.
TESTS AND WARRANTY
Warranty
2 Years
Our Ecodesign Approach
Our ecodesign approach reduces the environmental impact of our products.
We’ve examined the environmental footprint of this product in order to identify how we can produce it in a more sustainable way. With this knowledge, our design teams were able to develop this product while significantly reducing its environmental impact.
Sustainable design measures implemented on this product.
-
MaterialRecycled polyester
Product made from 4% recycled polyester
Using recycled polyester rather than conventional polyester reduces the CO2 emissions linked to the material by at least 17%.
-
ProcessDope dyed
Product made from 63% dope dyed yarn
Using this mass-dyeing process enables us to reduce CO2 emissions linked to the production of dyed textiles by at least 17% compared to conventional dyeing.