City Bike Tyre City5 Protect 650X35A / ETRTO 35 - 590 / 590 mm Rims
Store Availability
Store Availability
BENEFITS
Compatibility
2 references: 650A, 590mm diameter rims 650B, 584mm diameter rims Check
Puncture resistance
Good resistance with the 22 TPI carcass.
Weight
684 g. Stiff bead.
Efficiency
Semi-slick tread gives it good performance.
Grip
Ribbed tread for good grip on the road.
TECHNICAL INFORMATIONS
IMPORTANT COMPATIBILITY INFORMATION
Two references for city tyres are available in size 650:
650A, for rims with a 590mm diameter,
650B, for rims with a 584mm diameter
Be sure to check this information.
These tyres are designed to be installed only on traditional 26" rims for mountain bikes, 559mm diameter.
How to measure tyre wear
To measure the wear on your city bike tyres and to know when they need replacing, you need to inspect the tread.
Usual signs of wear include:
- tread starting to fray
- the appearance of a series of micro cracks
- low tread depth
- the carcass becomes visible.
In all these cases the tyre is worn and needs replacing.
How to remove a tyre
To remove your tyre, deflate the inner tube until no more air comes out.
Once deflated, use a tyre lever to remove the tyre from the rim.
How to fit a tyre
To put the tyre back on, place one side of the tyre into the bottom of the rim. Next, inflate your inner tube to approximately 30% before putting it into the tyre (inflating it beforehand reduces the risk of pinching the inner tube).
Then, insert the other side of the tyre into the rim, starting on the side opposite the valve.
Before inflating the inner tube all the way, check to make sure it isn't pinched between the tyre and the rim.
How to inflate your tyre correctly
Inflate your tyre carefully. The recommended pressure is shown on the side of your tyre.Also, before each outing, make sure that your tyres are at the correct pressure for your ride.
Tip from the pros
When inflating your tyre, make sure you inflate it to the suitable pressure for the terrain you will be riding on and, above all, the weather conditions you will be riding in.
When riding in rainy weather, lower the tyre pressure to increase the tyre's traction.
On the other hand, when riding in dry weather, you can increase the pressure for better performance.
composition
composition
Membrane: 15.0% Steel, 35.0% Ethylene Propylene Diene Monomer Rubber, 15.0% Polyamide, 35.0% Latex Rubber
Tips for storage and maintenance
Storage tips
This is a stiff bead tyre; to avoid damaging it, do not fold it. Leave in original shape when storing.
Restrictions on use
Inflate to the recommended tyre pressure printed on the sidewall
TESTS AND WARRANTY
Test product
At B'Twin we create the tyres of tomorrow. Our R&D engineers design our tyres at our international headquarters in Lille, France. This is tested in our laboratories and approved in use by our customers to ensure the very highest quality. This expertise is highlighted on our range of B'Twin tyres with the label "Designed in France".
Warranty
2 Years
Agree by
The Wheel Energy laboratory, certified and recognised by the leading global brands, measures several different criteria: grip, cushioning, resistance to wear, longevity, performance, etc.