SCD 900 Scuba Diving Buoyancy Compensator
Store Availability
Store Availability
BENEFITS
Lightweight
3.3 kg in size M
Versatility
2 deployable weight pockets (3 kg each) + 2 fixed back pockets (2 kg each)
Abrasion resistance
Fabric material: 400d dobby polyamide. Bladder fabric: Polyamide PA210
Flexibility
5 securing rings, 2 side pockets. Stainless steel automatic strap buckle.
Adjustable
Automatic dive tank strap with a stainless-steel buckle
Carrying comfort
3D compressible back to increase carrying comfort
Buoyancy
High buoyancy with deployable bladder: 180 N
Instructions
DownloadTECHNICAL INFORMATIONS
Type of BCD
The SUBEA SCD 900 buoyancy compensator is of the “wraparound” type: the volume of the air is distributed over the entire surface of the body that is covered, providing a significant level of buoyancy and improved support in the vertical position. This makes for greater comfort in the surface phases.
The SCD 900 BC is designed for comfort and its adjustment has been optimised by the harness with a wide front strap, a chest strap and patented braces.
Unisex buoyancy compensator with patented V-shaped straps: Rgomoove concept
The exclusive shape of the straps leaves the arms free whilst providing even better support. The shape of the straps also prevents compression of the chest, making this buoyancy compensator suitable for both men and women. The buckles on the straps allow for easy and accurate adjustment thanks to their shape and size. For easy adjustment, you are advised to pull the straps from the shoulders towards the hips (the direction of the braces) rather than downwards.
Accessories to attach and store everything you need in safety!
5 rings: 1 3D anodised ring on the left shoulder, 2 on the right shoulder, 2 3D anodised rings on the hips and 1 PVC ring inside each pocket.
2 ejectable weight pockets that can each hold up to 3 kg + 2 fixed weight pockets (“trim” weight) on the back
The chest strap has a built-in whistle to call for help on the surface.
Ease of use
The drain tabs have been moved forwards: on the chest for the upper drain, and on the belly under the right-hand pocket for the lower drain. Their shape and the choice of metallic grey also make for an easier grip (by the diver or a mate).
The two large side pockets are able to hold numerous accessories. They are fitted with injected plastic zips to avoid salt build-up that would block them.
Carrying comfort
For more comfort, the SCD 900 jacket is fitted with a rigid back complemented by a soft compressed 3D foam lining at the points of contact with the back.
The braces are also padded for more suppleness on the shoulders.
The front strap is designed with elastic parts so that the compensator fits perfectly on the back and hips.
Buoyancy
S =160 N (15 l steel tank)
M =180 N (15 l steel tank)
L =210 N (15 l steel tank)
XL =220 N (15 l steel tank)
This Subea SCD 900 jacket complies with standard EN 1809: 2014 (the latest version of the standard). It has been certified by the ITALCERT SRL laboratory in MILAN
Italy (European Notified Body n° 0426).
Product composition
SUBEA buoyancy compensators are made of high-quality materials that have been tested in seawater and in pools.
Fabric material: 400d dobby polyamide.
Inflatable chamber fabric: PA210 polyamide with PU laminate.
The size label is always visible on the compensator’s collar.
Supplied with a direct system hose.
Care advice
1/ Rinse your buoyancy compensator thoroughly with clean water. Pay particular attention to the drains and the inflater. 2/ Empty any water that may be contained in the buoyancy compensator by pulling the lower drain tab. Do not store water in the inflatable bladder.
3/ Dry your buoyancy compensator on a wide hanger, out of the sun.
Inspect your buoyancy compensator once a year and look for any signs of wear. Inflate the inflatable chamber by mouth, then wait 12 hours to see if it deflates.
Servicing buoyancy compensators
Your buoyancy compensator must be inspected and serviced by a certified SUBEA centre at least every two years, and more often if you are a frequent diver.
After Sales Service: Please visit our website.
composition
composition
Main fabric: 100.0% Polyamide
Tips for storage and maintenance
DO NOT WASH.
BLEACHING EXCLUDED.
DO NOT TUMBLE DRY.
DO NOT IRON.
DO NOT DRY CLEAN.
Storage tips
Store on a hanger in a dry, ventilated place away from direct sunlight (make sure the buoyancy compensator is slightly inflated).
Restrictions on use
Using a diving buoyancy compensator requires the certification of an instructor.
TESTS AND WARRANTY
Test product
Our technical partner: Planet Ocean (the PADI 5-star diving centre) based at the WaterSports Centre by DECATHLON in Hendaye - France. The centre uses SUBEA diving equipment throughout the year. The team of instructors are rigorously involved in the development of our SUBEA products: from the design phase with the teams (product managers, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).
Warranty
2 Years
Parts guarantee
Availability of spare parts essential to the use of the product: 10 years.